Not sure why this information is so hard to find for me. I know I've seen it in the past when doing other upgrades. I'm working on upgrading a vWLC from 7.6.120.0 to 8.8.130.0. From what little information I can find it looks like I need to
On new laptops with Win 10, we encountered a problem connecting to WiFi with configured 802.1 x authorization. The behavior is that if you just select the broadcast SSID and try to connect, the connection does not occur, most likely due to the fact t...
Hi all,im new here, so this is still planning phase i would like to implement wlc 5520 integration with openLDAP where when user login with 802.1x they get specific vlan base on identity, would it be possible without using ISE ?need your opinionsthan...
Hi, I'm trying to apply obstacles to better visualise outdoor coverage for a campus of approx 40 access points. I have 63 obstacles defined already but am unable to add any more, does anyone know if there is a max obstacle count for example? As anoth...
Hello, We have a setup on which we want to use flexconnect on cisco wireless APs and dot1x on switchports.Normally, using NEAT/CISCP can help with this setup but i have seen that Cisco ceased the support for the feature starting from 8.7 version.Do y...
Hello,We have a central site and a remote one that is very rarely visited, and reserved only for big events, For corporate wifi users the authentication goes through the active directory which is hosted in the HQ, sometimes some authentication issues...
Hello. I would like to ask for advice and suggestions regarding how to find a lost Access Point that is lost between the floors in a multi-story Building.I have a Cisco network deployed in a building that has a Ground Floor, Mezzanine, floors from 1 ...
Hi All, I have one project with high density of clients (12 000 public clients in one time, not all of them will use mobile phones, but let's say half of them,access only to the internet, which will use only apps with small traffic), which will be c...
Hi guys,This command configures the syslog host for all APsconfig ap syslog global host x.x.x.xAnd this command configures the syslog host on the WLCconfig logging syslog host x.x.x.xIs the result of both commands the same?Can both commands be used?A...
Hello I have a 4G-CAB-LMR240-25, and ANT-4G-OMNI-OUT-N and require a connector from the extension cable (TNC) to the Antenna (N).Looking for the part number to order.Thanks!
I have new access point AP1572EAC-M-K9 with version 8.5 ,it join WLC 5508 with version 8.0 for seconds then disjoined ,what are the reasons?
I'm trying to troubleshoot a roaming problem, where some of our client sometimes experience a 20 second interruption of connectivity. The problem occurs about once in every 50 times the clients roams.All involved access-points are connected to the sa...
Hi all, Can you suggest what is the right model for AP outdoor Wi-Fi 6 802.11ax? Thanks
Hi there!I have some AIR-CAP3702I-E-K9 Access Points and they was in infracstructure mode. Currently, i have neither the software nor the hard to run them in infrastructure mode. Because of that, i've flased the firmware to standalone. (the firmware ...
Hi, I have 5 APs on a single site which are connected to the WLC. it currently has the below software version installed I was wondering if there was an upgrade path to 8.10.130.0 or could i go straight to there and upgrade the AP via the tftp option...
