XR OS and Platforms

HejIf we have a txt file with 1000 prefixes for example, can I reference it somehow in CLI to be used in a prefix-set instead of adding all 1000 prefixes at the CLI?Regards

HejWe have a ASR9900 and was wondering if it is possible to hide some of the configuration on CLI to keep the Cli clean?For example if I have a Prefix-list with 1000 entries I would just like to see the name of the prefix list and not all the Prefixe...

ncs5501 - stuck in sysadmin mode - how to return to router rp0 user mode

Hi All,My customer has an NCS540's interface Gi0/0/0/1 configured with "ip address dhcp" alone to act as a DHCP client:interface GigabitEthernet0/0/0/1  ip address dhcpIt gets what looks like a perfectly valid DHCP response from the server with the I...

Hi Folks,I hope you are well !Did you have some lab/trial experiences with XRd or other Cisco Virtual Router and Containerlab ?Please find below some fine articles about it. Sounds like it is not yet possible but maybe someone has some news about thi...

I am curious if there is a command on the NCS5500 Platform that I can do to see what the Linux Release is? We will be upgrading code to a newer release and understand that we need to do an interim XR release to get the Linux Release changed. I'd like...

We are running 7.1.2 on our NCS55A2's and realize there is a need to upgrade. However, my lab gear was at 7.7.21 so I wanted to document the steps to get from 7.1.2 > interim release (change linux os)>final release. I did that today on one device in ...

Hello ,I encountered a strange problem, the details are as follows.This is a N540-24Z8Q2C-M in the laboratory, which is only used to test optical transceivers. I have not done any operation on the device since the last shutdown. When I turned it on t...

Hello everyone. Can someone explain the details of IOS XR licensing for versions later than 24? Is traditional licensing without subscriptions still available? For example, if my device does not have access to CSSM for more than 90 days and transitio...

HiCould anyone clarify situation with CSCwf25878 (HW Programming failed for table,mplsnh,key,unit,0,dpa_trans_id,1633532,failure-reason,InternalE)?According bugsearch (https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf25878From one hand affected rel...

Hello,I'm currently trying to install asr9k-x64-7.11.2.CSCwk15658.tar on two different systems:- 9904 with A9K-RSP880-LT-SE- 9912 with A99-RP2-SEI've tried different ways, but it always ends with an inconsistent software state and a complete rebuild ...