EVPN IOS-XR standalone interfaces (non-LACP / non-bundle)

Has anyone successfully tested or deployed EVPN Ethernet-Segment multihoming on Cisco NCS540 using the following model?standalone interfaces (non-LACP / non-bundle)dot1q trunk subinterfacesVLAN-based l2transport servicesper-interface ESI configuratio...

How to configure port monitoring (SPAN) on a Catalyst 2940, 2950, 2955, 2970, 3550 or 3750 series switch

ResolutionYou can analyze network traffic passing through ports by using Switched Port Analyzer (SPAN). This sends a copy of the traffic to another port on the switch that has been connected to a SwitchProbe device, another Remote Monitoring (RMON) p...

UCS - 220 M5 - Impossible to boot on HUU 4.3.2.26 from KVM mapped DVD

Hello,We need to upgrade CIMC to last version and I get a uncorrect signature message when trying to boot UU 4.3.2.26 from KVM mapped DVD.I can't disable secure boot, but I can set it to Legacy mode (instead of UEFI), no change. 

ACI version 5.2(7g) CIMC compatibility

Hello,I have a query regarding upgrading the CIMC firmware on an APIC L3 cluster (C220M5).APICs are currently running  ACI version 5.2(7g), CIMCs are currently running 4.1(3f)Due to a vulnerability I would like to upgrade the CIMC on each APIC to ver...

Webex Control Hub .Is there any configuration revert function ?

Hi ,  Good Day.  Is there any configuration backup on the Control hub. Something like you can revert the change on the dial-plan , user/agent information , hunt group setting to a previous stage (maybe 2 week ago). This is to avoid there is a misconf...

WXCC - Supervisor Call flow - Early closure

Hi All,  I am trying to find the best solution to enable a Supervisor to close the contact Center early, by dialing in and adding a PIN.  I am struggling to find any documentation.  Can anyone point me in the right direction, please?

Multicast RP placement - MSDP vs anycast

Hi AllAttached a high level diagram of our setup. As of now, the existing RP is configured with Anycast with MSDP , and is not in PATH of the SPT (shortest path). Incase the RP goes down, the existing SPTs are not broken, and any new receivers, will ...

Módulo 1: Introducción a Cisco Catalyst Center (DNA Center)

Pre-requisitos: Ninguno Al finalizar este módulo, podrás:- Entender cómo Catalyst Center puede ayudarte y el valor que proporciona la solución en los distintos casos de uso.- Tener la solución de Catalyst Center instalada y operativa, con las configu...

0 Grabación Sesión 3 Comenzando con Catalyst Center

New filtering, Code Exchange AI repos

New filtering now available for Code Exchange AI reposNow you can filter MCP servers and AI agents based on who developed them. We have two optionsDeveloped by Cisco - product-team MCP servers tend to be a more stable choice, and most of them are rem...

like to conect cisco Network tech support on ARP Proxy and NDP support

like to connect to speak to a cisco Network tech support on ARP Proxy and NDP supporting L3 switches

Meraki MT - EOL

Hi , Every Meraki MT ( sensors ) are now EOLhttps://www.cisco.com/c/en/us/products/collateral/security/physical-security/meraki-sensors/meraki-mt-sensors-eol.htmlhttps://documentation.meraki.com/Platform_Management/Product_Information/End-of-Life_Not...

Deploying Cisco XDR Client Management on macOS via MDM

Deploying Cisco XDR Client Management on macOS via MDM/EMM: Resolving the Hidden .Resources Dependency Note on MDM/EMM Platform: This guide uses JAMF Pro as the MDM platform based on lab availability. However, the approach documented here — pre-appro...

CSCtd17258 - CUCM Admin password reset gives false negative

Discovered this exact issues exists in Unified Contact Center Express 15.0(1) 15.0.1.10000-27.