Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
Configuration Sync Not Loading - Workaround
by mloraditch -
New Hardware?
by RWelch-USA -
Wave 1 APs on 17.12.x
by Beazle -
CSCwt99387 - SDWAN INFO message does not support remote syslog logging
by thomas-reifferscheid -
NDFC behaviour difference
by SandBoyz_16 -
Firefox internet disconnect after Cisco Secure Client on macOS Tahoe
by mmathebula -
Meraki API Feature Request: Public API Endpoint for Splash Authorizati
by Icush -
Re: Ethernet uplink speed degraded
by RobertKozka
Community Activity
OSPF Rib Decision
So, I placed 3 routers in my lab r1--r2--r3. I run area 0 between r1 and r2 and area1 between r2 and r3. And then I advertised similar subnet on ospf on both r1 and r3. What I saw in the routing table amazed me a bit.1.0.0.0/32 is subnetted, 1 subnet...
SRv6 routing issue
Hi allWe have configured SRv6 between a Cisco NCS router and a Huawei router. The peers are communicating over ISIS. BGP peering is established using IPv6 addresses. Under this BGP session, both VPNv4 and VPNv6 address families are enabled.IPv4 route...
Workflows RBAC?
Is there a timeline or estimated release date for basic or advanced RBAC for Workflows (for SSO dashboard logins)? Basic:Meraki Dashboard Role with only access to Automation (Edit) or (Run)AdvancedTAG-based to allow a role to execute only automations...
SSID Reset to default
I hope we have soon a feature that lets admins reset an SSID to its default settings with one click. Right now, we have to manually undo every setting, which takes time and can lead to mistakes.Saves Time: Quickly resets an SSID without needing to ch...
New Hardware?
Apparently I missed the announcement of these:C8111-C-G2-MX, C8121-W-G2-MX, and C8121-CW-G2-MX Data Sheet
Wave 1 APs on 17.12.x
Has anyone had any issues running wave 1 APs on 17.12.x? I understand the APs have gone EOS, however we still need to support them in our environment and with 17.9 approaching EOS we need to look into upgrading our WLCs to a new code train. I underst...
Configuration Sync Not Loading - Workaround
Had to call support on this as configuration sync was not loading for any org. It's a known bug with the recent gui changes and no fix eta.Figured I'd share the workaround:This can be worked around by appending the URL with "?show_new_side_navigation...
#WomenInTech Fireside Chat | Marci, Cisco Chief Learning Officer
Get to know Marci Paino, Cisco VP of Enterprise Learning and Growth (Chief Learning Officer)! Dual Role: Chief Learning Officer + AI Workforce ConsortiumSkills in the Age of AIAI Adoption Day + Learning at CiscoPersonal Learning + LeadershipFuture Th...
IOS XE RSVP-TE affinity
in IOS XE (and also XR if you want to), you need to use hex value to define affinity (admin group) for link colouring in RSVP-TE.since you can only configure one affinity per interface and one affinity/mask pair per LSP, does that mean the mask match...
CSCwt99387 - SDWAN INFO message does not support remote syslog logging
Workaround: event manager applet eptracklogevent syslog pattern "SDWAN INFO: (.*)"action 010 regexp "SDWAN INFO: (.*)" "$_syslog_msg" match MESSAGEaction 020 syslog msg "FOUND: $MESSAGE"
NDFC behaviour difference
Hi fellow members, deploying a NXOS based fabric using NDFC and came across the concept of "multi-attach" and "multi-detach" of networks and VRFs. When coming from an ACI world, this does not exist there. Every network/BD and VRF when created is depl...
Resolved! cisco IOS XE Upgrade
Hello , we are using Cisco Catalyst 9300 as below in install mode and we have completely classical routing features etc. As we want to upgrade on Cisco Portal we have no more IOS Image with same Bengaluru series. I believe now we have option to...
WXCC - Supervisor Call flow - Early closure
Hi All, I am trying to find the best solution to enable a Supervisor to close the contact Center early, by dialing in and adding a PIN. I am struggling to find any documentation. Can anyone point me in the right direction, please?
C9105AXI-EWC-A v17.6.4.56 stopped associating clients
Hi!I would like to ask if someone else is having or experienced this kind of issue. I have several C9105-AXI-EWC access points and they stopped working all of the sudden at the same time. Light indicator is steady green instead of the usual steady bl...
Re: Ethernet uplink speed degraded
We are in the process of replacing MR52 with 9166, few of new APs went into 100Mbps mode but the MRs were working fine on the same cable. Does anyone know how is Meraki AP checking the "cable quality" and why it decides to go into 100Mbps mode?
