Cisco IE 9320 stack testing

We have a stack of 3 IE 9320 switches connected. We tested by powering off each switch and how the end device behaves. While powering off, we see one ping drop and while switch is powered back and then when it gets added to the stack we see intermitt...

WebEx Room Kit after Cisco Touch 10 EOL

It looks like the Cisco Touch 10 is EOL for Jan 31st, 2026. If I have a Room Kit I want to setup after that date, do I have to buy a Navigator in order to register the Room Kit with WebEx? Or will the Touch 10 still let me setup the Room Kit device?

Cisco 7811 Web GUİ

Hello, I have a Cisco 7811 phone and I want to access its web interface. I have the software version sip78xx.11-7-1-17.loads and I installed it, but the web interface still doesn't work. What could be the problem? Thank you.

Help with on-prem SD-WAN controllers

1. Environment and ArchitectureAll the controllers are on-premises (vManage, vSmart, vBond) and sit on the same local subnet behind a UniFi Firewall/NAT.We have 5 Static Public IPs. I have configured 1:1 NAT (Port Forwarding) mapping a unique Public ...

Register Panasonic KX-TG361 Cordless Phone with CUCM

Hello Cisco Community,I have a Panasonic KX-TG361 digital cordless phone and I would like to register it with Cisco CUCM.Is it possible to register this handset with CUCM? I know that CUCM supports SIP and SCCP devices.Please confirm if it is possibl...

Cisco AnyConnect VPN is failing the System Scan due to an antivirus.

Hi guys, I have faced the issue; it has begun to affect my VPN remote access connections as the pictures below. I also update the antivirus (Bitdefender), but it still doesn't work. After I clicked retry, it still pops up. any thoughts?    

ISE 3.2 P7–Context Visibility reset impact

Hi all,We are running Cisco ISE 3.2 Patch 7 (6 nodes, no dedicated MNT).We’re seeing an issue where not all endpoints imported via API from an external identity source are showing up in Context Visibility.Cisco documentation suggests resetting and re...

Private overlapping addresses

When merging two companies with private overlapping addresses … what are the options besides re-ip one whole company? Double nat? What else have you seen? Any cloud based solutions/services that can help in this setup?

WebEx Room Kit after Cisco Touch 10 EOL

It looks like the Cisco Touch 10 is EOL for Jan 31st, 2026. If I have a Room Kit I want to setup after that date, do I have to buy a Navigator in order to register the Room Kit with WebEx? Or will the Touch 10 still let me setup the Room Kit device?

Cisco 5506-X - IOS 9.9 + Firepower services or Upgrade to 9.16?

Hello, everyone.I recently got a few cisco 5506-X firewalls from ebay and would like to upgrade them to their highest versions as possible. These firewalls came with firepower services module with versions ranging from 5.4.1 to 6.2.3. I have been rea...

ON Prem SDWAN-how DC Cedge communicate via LAN for control connections

How DC Cedge Communicate with On-Prem Controller with their Service VPN as we have Dual MPLS Link which is directly termintaed to Cedge (NO WAN Edge)One way may be connect one more link to cedge to Core Switch in VPN0(Global VRF) add static route for...

How to configure STP for an RSPAN aggregator switch to analyzer?

Hi,I'm using an old Cisco 3750x as an aggregator switch for a number of other switches which are configured with an RSPAN vlan.  The Cisco 3750x then has the uplink port connected to a passive network monitoring sensor which ingests all the SPAN traf...

On peut enregistrer les Session Scindé webex meeting

Remote connection to Jabber

A customer installed Jabber on his office pc. He routinely uses Remote Desktop to his office pc from home to use Zoom, Webex, etc. that use audio from his home laptop. The audio settings were 'Remote audio' for the speaker, but for Microphone the cho...

8875 - Webex Calling - Speed Dial

I have a user whose phone (extension 8875) was previously registered to CUCM and had around 40 speed dials configured.After migrating the user to Webex Calling registration, the number of available speed dials is limited to 16 only.This change has ca...