Host not found error in corporate directory

Hi,I had CUCM 11.5 and upgraded it to version 15 SU3a with data export method and changed publisher hostname during that.After that all phones which are 79xx get host not found in corporate directory.The phone URL parameters and secure phone URL para...

9200 "network-policy profile" needed for auto VoIP Qos on uplinks?

Hello, I am trying to help a new client resolve their VoIP issues of phones cutting in/out. The phones are Yealink phones and are connected to Catalyst 9200 switches, which then uplink to 2 core 1300 switches. Right now I have configured a separate V...

SIP Trunk Failover Using Separate CUBE's

Hi Looking for some help on possible options to solve the following scenario. I've attached an outline diagram.  Normal call flow is CUCM >> Internal SIP trunk 2 >> CUBE 1 >> External SIP Trunk 1 >> SIP provider (PSTN) We can have a situation where S...

after maintenance this is THE RESULT still Error

Sandboxapicdc login issue

When we are trying sandboxapicdc.cisco.com we will be getting 404 error. 

Cisco Prime Infrastructure disk IOPS issue

Hello, I know we should have migrated by now, but we still have 2 physical GEN 2 Prime appliances with Prime 3.10 (primary + secondary). A couple of days ago the High Availability broke between the Primary and Failover appliances. After doing the Rea...

Local Authentication Server does not update policy on AP

I have a Cisco 9800 WLC running 17.12.5 and I have 1 central site (local mode APs where the WLC resides) and about 10 remote sites with APs in FlexConnect Mode and Local Authentication. Each remote site has a local authentication server with the auth...

EtherChannel on Router with 3650 Switch

PaI am using Packet Tracer to create a Lab. On NY-R1 I am not able to create the port-channel 1.10 sub-interface.  Does Packet Tracer allow me to create ether-channel sub-interface? NY-R1(config)#interface port-channel 1.10 ^ % Invalid input detecte...

Endpoints visible in Live Logs but missing in Context Visibility

Hello everyoneWe’re experiencing an issue in our Cisco ISE deployment where endpoints authenticate successfully (we can clearly see them in Live Logs), but they do not appear under Context Visibility → Endpoints.We have already run System Health Chec...

RBIテストサイトについて

Remote Browser Isolation(RBI)の動作を確認するための動作確認用テストサイトはないものでしょうか。 Cisco社で検証に使用しているサイトがありましたら教えてください。 Cisco Secure AccessやUmbrellaなどで経験がありましたら教えてください。  

Goal: Upgrade from Any connect client version to Cisco Secure Client 5

Dear Community Expert, We have Cisco Anyconnect client version (AnyConnect Secure Mobility Client  4.10.07062) and now we need to migrate to Cisco  SSE with Secure Client 5.1.12.146. What the possible way for deployment? Question 1 : From cisco SSE d...

MTU for SVL

Is it necessary to change the MTU for SVL links in a scenario in which interfaces are configured with MTU larger than default 1500 bytes?Traffic could flow between chassis through SVL links in a Stackwise Virtual cluster. Could not find any reference...