I have some particular use cases that I am thinking either to implement as Multi-AP, Multi-Tenant or Multi-VRF. But I can not decide and would appreciate some input from your guys. I am building a greenfield DC with ACI. There would be UCS chassis/b...
Forum Posts
Resolved! SSH Access to Leaf and Spine Switches
Hello, I am having trouble getting access to the CLI of the leaf and spine switches of my ACI fabric. I know you can perform show commands via the apic fabric command set but I am looking to execute the contract_parser.py script on the leafs to troub...
Hello, We have a point-to-point link connected on ACI fabric (leaf) (referring here as Site-A) from a remote site (Site-B). We are experiencing some minor ping drops while pinging from both the side. At both end we don't see any error on respectiv...
Hi, This is continuous to my other post. I am still not finding path on APIC GUI for checking BGP received and advertised routes. Same for OSPF, I can check OSPF received routes. Not not getting path for checking OSPF advertised routes. I am checki...
Hi all, Basically looking for maybe an example of L4-L7 service insertion without a service graph. It is mentioned plenty of places this is possible, but never seen an example. Every google search just ends up with a service graph example. I am g...
I have a small ACI fabric (3 APIC, 2 SPINE and 2 LEAF). The fabric was built and APIC/Switch firmware have been upgraded to 4.2(6d). Now we decided to rebuilt the fabric to use a different infra VLAN. Following instruction from link below, the APICs ...
(Qty# 2) ACI fabrics are connected via a simple iBGP L3Out connection to each other (i.e.: no Multi-site,...).Due to server migration - servers are getting disconnected from FabricA ---> get moving way to be connected to FabricB manually (there's no...
Hi, We have configured policy based redirect to an ASA in one arm mode. The ASA has a single default route towards ACI using its outside interface.ASA sourced traffic cannot reach any other endpoint in the fabric like NTP, DNS, etc. After doing some ...
We defined our DHCP helpers as follows x.x.x.x with associated Tenant A/EPG aaa ( in POD1)y.y.y.y with associated Tenant B/EPG bbb ( in POD2) we then assigned these helpers to Tenant B/EPG ccc in POD2 the requests work fine to helper y.y.y.y, which i...
Resolved! ACI Upgrade and fan incompatibility
I ran through this tool to check hardware compatibility support https://www.cisco.com/c/dam/en/us/td/docs/Website/datacenter/acihwsupport/index.html it says the following FANs are not compatible with ACI 14.2(6) NXA-FAN-30CFM-BNXA-FAN-30CFM-Fwe just ...
Resolved! MSO external streaming to Splunk
Hi all Did anyone configure MSO to send logs to Splunk? I'm trying to set up external streaming on MSO. The only supported service is Splunk. I have set up HTTP collector and generated the token. MSO keeps saying ... either Authentication Error or Up...
I have my first pod configured and i think the configurations in the IPN and the two wizards from APIC covered but actually the pod2 spines doesnt appear in the fabric membership not registered nodes. Which steps do you recommend to review this?? Act...
I try to compose an API call that retrieves all deployed EPGs on the ports of the fabric.I reverse engineered from the web GUI that is can be done for a single port with this call:https://{apic_address}/api/node/mo/{port_dn}.json?rsp-subtree-include=...
Say I have two Application Profiles under the same tenant, AP_1 and AP_2. Both APs are under the same VRF. There is a Guest_EPG created/configured under AP_1 and there are live endpoints connected. I would like to move it to AP_2. Within APIC, I cou...
Hello All, How to check the details of routes learned / received by OSPF or BGP protocols and the routing table on ACI APIC GUI Rgds
