from where do i get EPG's dynamic ip's?is it from fvAP->fvAEPg->fvCEp->address->ip OR fvAP->fvAEPg->fvCEp->fvIp->addr ?and what is the mask? is it the same one as the BD's /Subnet?Thanks,Yair
from where do i get EPG's dynamic ip's?is it from fvAP->fvAEPg->fvCEp->address->ip OR fvAP->fvAEPg->fvCEp->fvIp->addr ?and what is the mask? is it the same one as the BD's /Subnet?Thanks,Yair
Hi guys, Up until now I've had a very basic ACI deployment with everything I'd needed to do existing in a single physical domain and VLAN pool. Things have gotten a bit complicated. Basics are: 1. I have attached untagged traffic (i.e. VLAN 1) on spe...
Hi, Generally speaking within ACI, One EPG = One Subnet = One VLAN, right? If so, then Can multiple EPGs be associated with a single BD? If so, then how does one EPG map to a particular subnet within the BD? There could be multiple subnets create...
In a multipod deployment where 2 of the 3 pods have L3 outs for internet/external connectivity, is it possible to influence routing to have the 1 pod that doesn't have the L3 out to prefer use of one of the other pods for internet traffic over the ot...
Hi Guys, We're running into the following issue. I think it's a weird one. We have performed a migration to ACI and everything works as expected. However, when we reboot a VM and let it boot via PXE it doesn't work. If we use a normal PC in the sam...
This article aims to raise the awareness to wider audience about a very good tool-- Enhanced EP tracker application during ACI daily operational. It would help detect and remediate stale endpoints (along with monitoring of rapid moving endpoints). Y...
HI , i have created a tenant named test with application profile test with epg test. I binded the epg to a bridge-domain test-bd which has a gateway ip 192.168.99.254/24 , it is advertised externally. This bd is binded to vrf bgp-test-vrf. i have al...
Hello team! Is there any way to mask faults in ACI? Some of them are the following: F0532 port downF0135 disruptive external operation in EPGF1296 VPC down Thanks in advance!
dear all, currently i have an issue with my customer endpoint that connected to 2 aci leafs using vpc. the endpoint is a virtual machine which is reside in blade server (non cisco). the hypervisor is vmware esxi and only use a vss. i have configure...
Hello, Is there a way to assign specific VLAN IDs to the dynamically Portgroups created by APIC on VMware VDS (or DVS) ? I'm acheiving the static VLAN assignment result by doing it this way right now - 1. Assign one VLAN ID say vlan600 in the dynam...
Hi, how to reset a apic simulator 3.0 to factory default Thx, Glenn
I have an ASAv connected to port groups that are mapped to EPGs in ACI. The inside interface of the ASAv is set to the port group which is mapped to the App EPG, and the outside interface is set to the port group which is mapped to the Web EPG. Th...
I remember I click submit button when i change the bgp interface profile, now i log off from ACI, but when i login to ACI again, I found the "submit" button under bgp interface profile is not greyed out , so how would i know whether i saved or not?
Hi, I have 2 Leaf and 2 spine switch and 3 node cluster. This is a new cluster so i added only i node. One leaf and one spine has been discovered by APIC but it is not detecting other leaf. Tried rebooting,chnaged cable,restart dhcp on APIC.but no ...
can we automate fabric and access policies? I am going through ACI programmability module labs on devnet and it looks like all of these labs/modules are for tenant. I don't see any scripting for fabric and access policies? do we have to configure f...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-15-2024 07:37 AM | ||
08-14-2024 12:06 PM | ||
08-11-2024 07:15 AM | ||
08-08-2024 09:29 AM | ||
08-06-2024 04:02 AM |