Hi guys, Can anyone guide/provide/forward a NRFU template document for ACI implementation testing? Regards, Hafeez
Hi guys, Can anyone guide/provide/forward a NRFU template document for ACI implementation testing? Regards, Hafeez
Hi Experts , How to check the buffer size of Gig1/10 interface 93180YC-EX ?
Hello, my team has followed the deployment guide for the ACI Simulator 4.x on VMware ESXi. For some reason, I can see the vNIC mac addresses on the switches connected to the host, but I don't see the apic1-eth1 MAC address, and the VM won't respond t...
Hi, Im deploying a VMM domain to integrate the esx with aci on my fabric, but a i found some limitations ont it .The use of Vlan pool and a VMM/AEP profile is limited due to the number of vlan, enabling local vlan option can overuse the TCAM, and is ...
After upgrading the APICs to 5.2, it seems like the process to upgrade the nodes (Leafs and Spines) does not match the current guide: Chapter: Upgrading with APIC Release 5.1 or Later Using the GUI . Having not used 5.1, I am making the assumption th...
Hi all, on a EPG i have removed the static port, deleted the association on Interface profile between port and IPG and also deleted IPG not used anymore. When i delete the association on Interface Profile i get the error "invalid-path : interface d...
Hello! I've been tasked with finding L3Out static routes from all of our tenants on the fabric - The data needs to be specific to a set of nodes. At the moment we have around 100 or so tenants with quite a few static routes per tenant. So there i...
Hi, I have Cisco APIC Controller v. 4.2, I want to know if I am able to collect telemetry details and flow of traffic for a destination IP, and how can I do it? Thanks
I was wondering if it is possible to replace the ACI leaf with a different model, I'm very familiar with actual procedure on how to replace a Leaf switch but my question is if I have two Leafs "Nexus 93180YC-FX" want to replace them with two new Leaf...
Hoping to get help on this. I've got the aci module for interface descriptions from the github - name: Set Interface Description cisco.aci.aci_interface_description: host: "{{ inventory_hostname }}" username: "{{ username }}" password...
Dears, We've VPCs configured in ACI with L3Outs/L2Outs on and facing issue that some type of traffic after single link failure in VPC has dropped. like ping/trace is working but SSH or HTTP is not working and after to fix the passive issue all kind...
Hi I have a Multipod Enviroment site A and B. I have two IPN Check diagram pls. One of these circuits is for Production Environment (1G )and the other one is for BK and replication traffic (1G as well). So I have to set up in order to avoid IPN will ...
Is there a way to view an endpoint IP address within the APIC gui?
This is the config on the IPN side(my question is not about the config on spines, we assume that they are fully confged)src: y0chub.cm/watch?v=HJJ8lznodN0"The spine interfaces are connected to the ISN devices through point-to-point routed interface...
Hello all, this is my first post. we are planning to upgrade our fabric its integrated with scvmm 2016. My doubt is while upgrading fabric from the current version to intermediate followed by target version do i need to update the scvmm agents also?L...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-08-2024 05:11 AM | ||
10-08-2024 12:55 AM | ||
10-04-2024 09:09 AM | ||
10-03-2024 06:03 AM | ||
10-01-2024 01:48 PM |