Hi All.I upgraded my CM using the copy ftp install command and reloaded CM and all worked fine.I now noticed the following Critical alarm appears on the CM device:"Central Manager's secure store is initialized but not opened"ThanksZubair
HiI need disable services in my box cisco css 11503. The services that want down: SSH, FTP, SSL.No want restrict the port, I wish down ports ssh, ftp y ssl or refused conection because currently is listening.Thanks So MuchDaniel Mansilla
Hi,I am currenlty running A3(2.6) and evaluate the possibility of upgrading to A4(2.1). The Instal & Upgrade Guide A4(2.0) mentions that A4(2.0) does not include all features of A4(1.1). Does this apply to A4(2.1)? The Release Notes mentions a list o...
Hello,This hasn't happened so its purely theoretical.What would be the outcome if a WAAS appliance was under spec'd? If the traffic thoughput was greater than the appliance could handle. Is it just a case of it going into pass-thru mode?Any info woul...
We are currently splitting up a campus installation (2 datacenters with < 300m cable distance).One datacenter remains on the campus, the other one is moved to another part of the town, approx. 30km away.The two datacenters are interconnected using DW...
Hi ,I upgarded the WAAS os from 4.2.3 to 4.3.3 on a WAE-274 . The "sh ver" ," sh flash" result shows the WAAS OS as 4.3.3. But in WAAS CM, under s/w version the device shows "4.3.3 {update failed} " error .I also tried to reload the device after upgr...
Experts please let me know ,as we have an application ,where the traffic is not loadbalanced equally on the servers.production# sh serverfarm epmcubesrr serverfarm : epmcubesrr, type: HOST total rservers : 2 --------------------------------- ...
We have a mix of ACE20s and ACE30s currently and I am seeing the ACE in both HW platforms failing out our servers sporadically after a sucessful TCP handshake. Here is the configuration:probe tcp TCP-25 port 25 interval 25 faildetect 2 passd...
When I look at my traffic summary reporton our CM, 30% of the traffic is WAFS? Is this the protocol used to optimize and accelerate, or are these other protocols that are not able to be optimized?
When I initially configured networking for my ACE XML gateway I set the eth2 interface to AUTO. Now I want to go back and change it to 100 FULL but when I go back through the Network Configuration menu it no longer presents me with the screen that a...
We are planning to implement WAAS on our hub's 6500 core switches, so that TCP connections from the end sites users to the servers in the hub can be optimized. But we have the servers VLAN groups under the Cisco CSM module already. Are the client-ser...
Hi, Reading the documentation I believe this is hot swappable although I just replaced disk03 and my appliance stalled,. I had to reboot and remove new drive. Device has layer 3 up but no ssh or cms connectivity. Has anyone else seen this I am run...
Got 2 x 2921 SRE WAAS, one at DR center, one at main office. I read from Cisco manual. On DR,Wan Interface configured ip wccp 61LAN interface configured ip wccp 62On Main office'WAN interface configured ip wccp 62LAN interface configured ip wccp 61Is...