Archived Small Business Support

In v1/v2 we had the ability to do protocol bindings for both WAN ports on the same screen. Now to change something you have to jump around screens.  This is definitely not an improvement in the GUI.  Again, I strongly urge you to go back and look at ...

Hi,just noticed that unmanaged switches are not recognized, which I guess is not a surprise by itself ;-)But what about the following:I use an ESW540-8P, so that switch has obviously 8 ports.Thunderbolt shows I have 14 devices connected to an 8 port ...

On Backup and Restore the options for Export to Mirror result in an error that "The Mirror.config does not exist".  There also appears to be no documentation on what this does.  I assume this is an option to have 2 RV0xx's and to have one mirror the ...

The tree view is nice for perhaps a dozen devices, after that it's unusable.  The problem is it's all too easy to accidentially click on the Tree View button in the Topology.  I'd like it to either warn me or let me set a default view that returns no...

I'd like the portal to tell me when it cannot connect to a system remotely.  Right now the dialog box just disappears if it cannot connect.  A little box of "Hey, I can't connect to the device using this protocol" would be nice.

Installed the TBA and it will not get an IP address from our Windows 2008 server.  The ESW got an IP and if I remember correctly the WAP4400N got one before I hard set it.  I connected the TBA to another web enabled router (basically the client DMZ) ...

I'd like to see an option to test a notification rule, say a button that sends out a test message, just to ensure notifications are setup properly.

I've not had access to my cell carrier until recently so I've not tried setting them up until now.  What I'm finding is if I want to set up a global critical notice I cannot do that with a cell phone.  I can to my work e-mail but not my cell.  I have...

I was creating some reports and just was thinking that wouldn't it be good to have a time stamps in the report of when it's occurred , i see that it's order from A to Z . Think it would be better benefit if we had a time stamp with these reports.Than...

Ok, so we now have access to both switches like the ESW and PoE devices like the TBA and WAP4410N.  Now, wouldn't it be slick if I could just right click on the PoE device and choose "Power Cycle" and have the TBA send send the request to the switch ...

BTW, absolutlly greet work on the remote access! I was testing it out to get to one of my phones and that will definitely be handy feature. John Grange Application Engineer Netswitch Technology Management San Francisco, Bangkok, Hong Kong

The mobile version of the portal site should support the iPad as well. It does not seem to at this time.When editing a device and looking for an icon, suggest to order it by name, otherwise the search is unpredictable...

¿Cuantos terminales SPAremotos se pueden configurar en UC560-UC540?Ricard

Marcos,  Since the last drop, our box is unresponsive (ours meaning the one at our offices).  It is getting an IP address.  It would momentarily “phone home” after a power cycle.  It is pulling DHCP every power cycle, but cannot ping nor log into t...