Cisco Software Discussions

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Forum Posts

Hi everyone,  I just setup my own network and configured the routes between the serial cables statically, I tried sending an email from the Curzon PC to the Millenium Point PC in a different LAN but both the PCs are unable to the servers in the Josep...

tbasi19 by Level 1
  • 10744 Views
  • 4 replies
  • 0 Helpful votes

Resolved! 3650 IOS upgrade

I have a 3650 stack I want to do an IOS upgrade on.   It's currently running version 16.3.6 and I am upgrading to 16.3.7.  With the stack do I need to put the image on each individual switch or can I just put it on the master switch and will the mast...

T_tow by Level 1
  • 1281 Views
  • 6 replies
  • 0 Helpful votes

Hi,i make formatting to my flash:and i try to upload ios image from rommon mode via tftp rommon 1 > IP_ADDRESS=192.168.1.2rommon 2 > IP_SUBNET_MASK=255.255.255.0rommon 3 > DEFAULT_GATEWAY=192.168.1.1rommon 4 > TFTP_SERVER=192.168.1.1rommon 5 > TFTP_F...

zahid3 by Level 1
  • 2046 Views
  • 1 replies
  • 0 Helpful votes

RSP card reboot continously due to "CEST: %OSPF-3-CHKPT_SEND_FAIL: Checkpoint message send failed: CF status callback: CHKPT_STATUS_SEND_FAIL"From the available logs, we observed that the trap in the Module 5.<Sample trace>Line 911: 000933: Apr 23 07...

C L by Level 1
  • 388 Views
  • 0 replies
  • 0 Helpful votes

I noticed this on one of our ASR1006-X routers this morning. Has anyone else ran into this error. Software bug? Doesn't appear to be service impacting to the router. Apr 24 08:03:38.413 dst: %IOSXE-3-PLATFORM: R0/0: kernel: i2c_master_xfer (line 276)...

c-ddeitch by Level 1
  • 827 Views
  • 0 replies
  • 0 Helpful votes