Resolved! ASA 5585 interim Upgrade
I'm updating both asa and asdm images from 9.1 to the latest version. Can I update directly to the latest version or do I need to undergo any interim upgrades. It will be great if anyone can guide me on this.
Forum Posts
Is there a backup cisco proprietary software?
We notice significant performance degrade when routing between vlans on the Cisco SG300-20 switch. The test is a simple wget of a 250MB file. The file transfer rate is erratic, between 1 MB/s to 8 MB/s when it is between vlans. The file transfer r...
Resolved! Cisco 6506 booting problem
Hi All. I have a Cisco 6506 which has booting problem. SP and RP have default 64MB Flash but there is an external compact flash(256MB) in disk 1. I have 2 question: 1) is it possible to use iOS greater than 64MB to boot(regarding SP and RP have def...
I'm facing an issue on NXOS 7.0(3)I7(3) running on a Nexus 3048TP switch with deleting a snmp-server use-ipv4acl/use-ipv6acl statement. Originally, I had a 32-character SNMP community (only last 4 character shown): snmp-server community ***********...
I was given a 1921/K9 router that came from an office whose T1 lines were decommissioned. It may have belonged to the ISP, but there is no identification or asset sticker to tell me for sure. The ISP did not ask for it back in the years since we mi...
Hi All, Please help to give a recommendation for below switch requirement Layer 3 Networking switch [Client]48x 1GbE ports4x SFP+ 10GbE ports4 x 10 GE Copper SFP+ Transceiver Module3Year (7x24) 4-hour Onsite Service Layer 3 Networking switch [S...
Hi Is my WS-C3560X-24T-S with ipbase IOS 15.2.4 software upgradeable for the enhanced feature set or like the 2960x series, do I need to buy an enhanced switch? TIA
Hi, i got the following error on my cisco mds 9k FC switch, 2018 Nov 22 06:00:54 MDS9k %SYSMGR-2-SERVICE_CRASHED: Service "snmpd" (PID 2599) hasn't caught signal 6 (core will be saved). 2018 Nov 22 06:00:54 MDS9k %CALLHOME-2-EVENT: SW_CRAS...
Hi Everybody, I have configured PPP multilink between r1 and r2 using one serial interface on each router. Everything is working fine except that interleaving seemed to be disabled in the output of the "show ppp multilink" command. I have included ...
This is my home lab with a Cisco 1861 router running IOS 15.1. I used the delete /force /recursive flash: command, and instead of typing the directory I wanted to delete after flash: I hit the enter key. Show flash tells me 0 files, and I do not have...
what protocols or service are enable by the ipv6 unicast-routing command?
Hi Guys, I'm trying to get server warranty information using Python and got to know about this support tools API. Registered on https://apiconsole.cisco.com/ and have clientID & secret. I don't see any documentation or starter guide on how to use t...
Good morning. Could someone please explain to me the difference between "Cisco AnyConnect Secure Mobility Client.evtx" and "Cisco AnyConnect VPN Client.evtx"? I'm trying to search for any remote connections to the computer with these two logs. Than...
Hi i am having an issue where my R4 router can send a packet to R1 but then R1 just drops it, R1's routing table does not contain the IP for R4, but R2 and R3 do ? R1 caan not ping R4 but can ping the rest, i am ost :(. I am trying to learn EIGRP a...
