Collaboration Knowledge Base

This document was generated from CDN thread Created by: Joel Stanfield on 15-09-2010 11:33:44 PM I recently had an ongoing issue with a 1700 system booting up to 5 times a day and usually while idle. Ended up that changing its IP address corrected th...

This document was generated from CDN thread Created by: Joel Stanfield on 15-09-2010 10:29:13 PM I found when feeding a HDMI signal into the DVI for content sharing the C20 codec would default to 30fps at reduced resolution. Since the purpose is to s...

This document was generated from CDN thread Created by: Chris Searle on 15-09-2010 09:28:55 AM I've been talking to the tandberg folk who are helping the norwegian java user group javaBin with the TCS servers for the javazone conference and they've s...

This document was generated from CDN thread Created by: Justin Myers on 13-09-2010 06:33:29 PM I am having a bit of an issue with the C series COMM Module: " TANDBERG_TC_v1_2_0_dr1_0_0"First off, here is my setup:Codec: C40AMX control unit: NI-900 AM...

This document was generated from CDN thread Created by: Bob Fitzgerald on 10-09-2010 05:31:05 PM Hey there everyone!I was told by a customer that they noticed something while setting up multiple rooms with identical equipment.  4 rooms, the codecs ar...

This document was generated from CDN thread Created by: Malathi Sekkappan on 10-09-2010 03:06:03 PM According to the documentation at http://www.tandberg.com/collateral/documentation/Application_Programmer_Interfaces/Codian%20Remote%20Management%20AP...

This document was generated from CDN thread Created by: Maciej Wilk on 06-09-2010 02:35:14 PM Hi,Is it possible to have both the PrecisionHD 1080p and PrecisionHD 720p on one C60 codec?Documentation states that the Codec C60 can also be used with Pre...

This document was generated from CDN thread Created by: Jochen Erkens on 02-09-2010 04:32:57 PM Hi all,because the TCS UI is not customizable, we decided  to integrate Lists of our recorded conferences into our homepage. We are using links to the TCS...

This document was generated from CDN thread Created by: Bret Wittmann on 02-09-2010 01:07:51 AM On this particular C90, every time I activate a preset id, it routes the main video source 4 to the far end. This happens when I use crestron to recall it...

This document was generated from CDN thread Created by: Marcus Newnam on 01-09-2010 07:07:41 PM Is there a way to pull the status of a scheduled conference via any of the TMS APIs?  It was my hope that the collection of conferences returned by GetCon...

This document was generated from CDN thread Created by: Phil Bridges on 01-09-2010 04:28:29 PM Is there a helpfile anywhere for Compositor?  I'm trying to set up scenarios based on 3 external participants - do I actually have to have 3 external parti...

This document was generated from CDN thread Created by: Jon Danforth on 01-09-2010 03:51:46 AM I'm doing Crestron control of a C90 and would like to give the user a period button so that they don't have to keep doing the press-and-hold maneuver with ...

This document was generated from CDN thread Created by: henry kyburg on 31-08-2010 01:02:06 AM -----Has anyone ever had success using a DVD/VHS deck as a source into the component input of a C90?----I know a year ago the C90s did not recognize HDMI v...

This document was generated from CDN thread Created by: Marcelo Rocha on 30-08-2010 09:08:19 PM Hi:I am trying to develop an interface for Codian in C#.Viewing the documentation all the interface must be done via XML-RPC. That means I have to create ...

This document was generated from CDN thread Created by: Andy Wander on 30-08-2010 09:02:29 PM A few questions regarding a C20 being used in an integrated AV system:(I know it is not meant for this use, but I need to do it). It will have TC3.1 softwar...