07-26-2016 06:49 AM - edited 03-15-2019 06:21 AM
Hi,
Can any one help to get the following license attached?
We need to understanding the Cisco UCCX agent license requirement.What is the relation between IVR port and Seat license?
If we need 10 agent what will be the premium seat license and IVR port license required ?
Regards
Debabrata Majhi
Solved! Go to Solution.
07-27-2016 04:19 AM
Cisco Unified CCX Maximum Agents: 400 is the standard line that shows up on every UCCX server when you go to Display License. Since UCCX supports a maximum of 400 agents only hence the line had been added there just from informational purpose but that does not specify your agent seats. What you are licensed for is actually Cisco Unified CCX Premium Seat(s): 10 and based on that you did get the 20 ports.
Attached to this post is license screenshot from my server that also shows the exact same thing as your license. Hence, what you are able to see is absolutely correct and Cisco Unified CCX Maximum Agents: 400 is just an informational line that you will find on every UCCX server.
Regards
Deepak
07-26-2016 07:30 AM
With CCX Premium which is what you have you get 2 IVR ports for each agent license. So, in your example you get 20 IVR ports 2 for each of the 10 agent licenses. This means that you can have up to 20 concurrent calls being processed by CCX IVR engine, meaning listening to prompts and in queue.
07-27-2016 02:34 AM
Hello,
I have gone through the all post regading this.
My point is in the attcahed license report there is
Package: Cisco Unified CCX Premium
Total IVR Port(s): 20
Cisco Unified CCX Premium Seat(s): 10
High Availability : Enabled
Cisco Unified CCX Preview Outbound Dialer: Enabled
Cisco Unified CCX Maximum Agents: 400
In the above post of Daren saying that per agent 2 IVR port premimum license required then why not the IVR port is 800 as in the license saying maximum 400 agent.
Regards
Debabrata
07-27-2016 04:19 AM
Cisco Unified CCX Maximum Agents: 400 is the standard line that shows up on every UCCX server when you go to Display License. Since UCCX supports a maximum of 400 agents only hence the line had been added there just from informational purpose but that does not specify your agent seats. What you are licensed for is actually Cisco Unified CCX Premium Seat(s): 10 and based on that you did get the 20 ports.
Attached to this post is license screenshot from my server that also shows the exact same thing as your license. Hence, what you are able to see is absolutely correct and Cisco Unified CCX Maximum Agents: 400 is just an informational line that you will find on every UCCX server.
Regards
Deepak
07-27-2016 04:42 AM
Thanks to all for your valuable comment
Regards
Debabrata
04-10-2019 11:17 PM
05-14-2019 11:55 PM
Yes you have to procure outbound license. If you have 5 outbound licenses, you can have up to 5 concurrent agent seats to handle outbound calls and 5 concurrent outbound IVR calls
05-15-2019 12:06 AM
Considering i have 20 premium license (40 IVR ports) and 10 outbound license(10 OB IVR ports), so i can make 10 IVR calls simultaneously, does this mean 10 of my 40 IB IVR ports can make out bound calls or i can have 40 concurrent IB IVR and 10 OB IVR calls?
10-06-2019 09:34 PM - edited 10-06-2019 09:45 PM
What happens when you upload 2 types of licenses to Cisco UCCX (ex premium and enhanced) as i understand Cisco UCCX doesn't support mixing features between different types of licenses.
07-26-2016 08:54 AM
Adding to what Chris said, if you have Standard or Enhanced license type which gives Basic IVR Ports then the number of ports is decided by the OVA that was initially used to deploy UCCX. For example, if you used 100 agent OVA to build UCCX then the number of ports you get is 100. Similarly, if you choose 300 agent OVA then 300 ports. However, in case of Premium package that gives you Advanced IVR Ports, it is always 2 ports per agent seat irrespective of what OVA was deployed and this cannot exceed the count of 400. What this means is that even if you have 225 seat license the ports will still be only 400 and not more than that.
You can refer below Design Guide for more information on this:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_10_6/design/guide/UCCX_BK_CBB99111_00_cisco-unified-contact-center-express/UCCX_BK_CBB99111_00_cisco-unified-contact-center-express_chapter_01.html#UCCX_RF_I310FD1A_00
Regards
Deepak
05-27-2021 08:22 AM
hi @Deepak Rawat , i know this is an old post but hope you can clarify few things if you are still around
I understand the advanced IVR ports are allowed when we purchase premium seats (2 ports per seats). these adv IVR ports are used for database integration, java, email notification etc vs basic IVR which is only for prompt play, menu option , digit collection.
lets say we deploy a 100 agent OVA, purchase 10 premium seats, so we have 20 adv IVR ports and 80 basic IVR. now lets say we have script that does email notification which notifies supervisor/manager when no agents logged in during business hours. if there is a 21st call comes in...would it be a problem on that script and even to go thru email steps.???
thank you.
vijay
08-29-2022 02:26 PM
Is anyone still following this thread? Is there some way to tell how many ports are in use in real time?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide