I would like to know which firewall under Cisco that can be compatible with Meraki MX, SDWAN can be excluded.
Forum Posts
We have been communicating with a Cisco partner and he said to us that the VM version of Cisco Secure Workload is no longer available. Please confirm me if that is the case. In our case instead of the cloud we prefer the on premise deployment.
Resolved! migration from FMC (2500) FMCv (VMware)
Hi!FMC2500 is going to be EoL soon so we've decided to migrate to FMCv instead, since we already have all the hardware we need inour VMware datacenters.Current setup:2 x FMC2500 (in HA mode) v7.0.4(55).New setup, migration to virtual machines in VMwa...
hi,just confirming if the ASA5555-X PSU is hot swappable?i don't see it indicates OIR/hot swap in cisco doc/linkhttps://www.cisco.com/c/en/us/td/docs/security/asa/hw/maintenance/5500xguide/5500xhw/asa_overview.html#198262.If you are replacing a power...
HiI have a single Firepower 1120 running ASA software which is currently in production and working fine. It has been decided to add a second 1120 and convert them into an HA pair running as active/standby for redundancy. Can anyone advise if there is...
Recently we renewed Public CA certificate from Entrust to DigiCert for ISE system EAP Authentication, and since then, devices have been failing to authenticate via EAP-TLS. These devices obtain endpoint certificates through the BYOD portal. This is h...
HelloWe have put new FPR 3105 devices into operation and are surprised at the operating volume of the fan modules.Normally, the system regulates the fans down to a normal level after the boot process. However, the fan volume remains very high on thes...
Hi We got the below info from Qualys for security vulnerability issue in device Nexus9300. Look like cipher need updated and ssh rsa key length needs to be changed. I reviewed the below link, but cannot find some configuration to change cipher or ssh...
I've created a new BYOL ASAv on AWS using an m4 machine type and it's having problems starting. It performs the initial boot, platform type detection etc, then restarts. However, it then hangs on the screen below. It's been like it for about 20 minut...
Hi Team, I am stuck in one issue i would like to all please help me to resolve this issue......I have cisco FTD 3105 model with version 7.3.1, from my firewall have configured 2 tunnels for different clients but the issue is both the clients have sa...
Hello team, I want to use Firepower3120 in multi-instnace mode. I going to create a port-channel on the chassi and assign it direct to instance. The question: is it possible to create subinterfaces for VLANs on portchannel in the instance? I ask, bec...
Resolved! View hit count on FMC for FTD ACP's
Is there a visual hit count on FMC to show which policies are being hit? I am in Policies > Access Control > ACP1 > but no hit count is visible..
Hi,I found configuration below on my customer switch:Extended IP access list ACL-POSTURE-REDIRECT10 permit tcp any 10.0.0.1 0.255.255.0 eq wwwAnyone know what is mean of wildcard 0.255.255.0 ?Glad to hear your response!
Dears, I'am using FTD 6.6.1 managed with FMC, i Configured Internal Certificats, Trusted Certificat, add DNS target with the routed interface, configured the Identity Policy, added it to the Access Policy and allowed it.When now i go the user compute...
Dear Cisco Community, Current in my lab using ISE 3.x with SC 5.x only check Anti-Malware (CS)installed. I plan to config more posture check by enable CS check both (installed and Running). Can you share good practice and how to config it? Thanks for...
