we need to equip a lab for educational purposes which supports the above features.
any suggestions for particular models?
the 3400m was suggested, but it's not clear to me that it supports all of the above.
tnx,
ams
Hello, Can you please confirm whether the devices ASR 901 and 902 support NetFlow. We want to plot utilization graphs for physical as well as virtual interfaces on this routers.
ASR 902 IOS:Cisco IOS XE Software, Version 03.13.01.S - Extended Support...
Hello
Is there an ios version for a WS-C3560-8PC-S switch that supports GLBP?
I found 4 versions but I'm not sure if they are for my switches.
Thanks for your help.
Hi every one I got a project from my boss (we're the ISP in this country) and he told me the customer have 2 branches in this country and 1 on USA and 1 Singapore. We need to use wan single subnet or like broadcast multiple-access. How can i do like...
I have router with specifications below, and I need to configure this router as PPTP server but I couldn't find anything about PPTP (vpdn) in documentation . My question is can I use this router as PPTP server for my clients or not ? If yes , then h...
Dear all,
Please help me how to fix Double-bit ECC error on linecard 7600-ES 20x1GE and linecard 7600-ES 2x10GE.
Our router:
- Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRE10, RELEASE SOFTWA...
We are looking to implement Metro Ethernet to commercial customers utilizing a 6509 at the head end and ME3400 at the customer premise. From what I have read it best practice to create the interface on the 6509 and trunk it to the ME3400? Are there a...
two c6500 switches rebooted unexpectedly in 4 hours interval, and trunk ports down for 1.5 hours. While analyzing there is 0 bytes size of debug crashinfo files, so no root cause can be found. Is this known issue, or any bugs?
c6500switch#sh slavesu...
Hello Guys,
I have a ASR9k and one of its interface connected to provider BT. multiple subinterface and corresponding VRFs are configured on this 10G link.
The issue is: when I am pinging the next-hop (BT interface ip address) with count 1000 and mt...
Hi,
I need to know the maximum quantity VFI supported in:
a) Cisco 7206 VXR with 12.4.11.T3 IOS running
b) Cisco ASR 1006 with 15.2.1.S1 IOS-XE running
c) Cisco 7613 with .15.3.3.S4 IOS running
Thanks so much,
Jorge
Hello together
I need your help, i tried to configure my switch for connectivity over a new MEF Service. But i doesn't works, can you check if my config is correct?
Here are a few details about my network:
The Branch A need a connectivity to Branch...
I have me 3400 with sw version 12.2(60) sw image me340x-metroipaccessk9-m. I want to limit fa port for 50/50 connections. I have tried the below config but it doesn't give proper speed
policy-map 50Mbps-out class class-default shape average 5000000...