We are exploring the possibility of configuring QOS policies for the main interface, which has multiple sub-interfaces. I want to know if a common policy applied on the main interface will be applicable to the subinterfaces too. This makes all layer ...
hi,If two routers are forming LDP neighbor relationship but no label swapping is taking place. Is is due to CEF or anything to do with BGP relationship between these neighbors.Please share the experience.Thanks in advanceSubodh
Hi Friends,Requesting you all to please share your experiences on MPLS-TE protection (in a ring), like best practices, caveats, feasibility, 'should I really think about it', etc... Thanks~sultan
Hello,I am working on setting up QoS in a MPLS VPN environment.I have set up my class maps to match specific traffic types and I plan on using the priority perfect commands.The problem I am trying to work around is that the provider of the MPLS cloud...
Hi all,Does any one have documents with tests made on a 7609-S switch wiyh an rsp720-3c-msfc4 and ES-2x10G cards, teste with latency, round trip delay and load on the interfaces.Thanks
I have two questions here if anybody can through some light on this.Q1) How do I assign a dynamic IPv6 address to a PPP Session via RADIUS. Only way I could get the IPv6 address assigned to the client is via a local IPv6 Prefix pool on the Access Ser...
We have a redundancy connection with our ISP from two different sites BG1 (border gateway working), and BG2 (border gateway standby), the ISP use local preference in order to select the path and the Borders gateways use RANK (in both sites) in orde...
hi,i have a problem about multicast for mpls vpn.ce1-Pe1-P-Pe2-Ce2.at the core use ssm .but i don't know how to config P.the configuration of Pe:ip multicast-routingip vrf a rd 100:1route-target both 100:1mdt default 232.0.0.1ip multicast-routing vrf...
Hi.Could someone confirm if Mapping from EXP to PRE to COS is automatic in any router? in my case I am ussing an 7600 with SIP-400. In other case I am ussing the same 7600 with a WS card. I am worried about the mapping between PRE to COS. Tranks.
Hi, I have multiple vrf's configured on a device and than a shared vrf. The shared VRF is used to form a ipv4 iBGP session between a redundant horizontal switch and an eBGP session with a downstream switch across a firewall. All the interfaces on thi...
Why are the times so high?! The ISP tells me the ckt fine and we don't have COS setup yet. This ckt is 768k and why would it bottle neck inside the providers network? G:\>tracert chicagoTracing route to chicago.com [10.100.18.81]over a maximum of 30...
Hi,How does the Label switching takes place on the routers ( MPLS-IGP-Network) where route summarization is configured? If it learns many small subnetworks from some interfaces and a summarised route is published in order to reduce size of the routi...
Can I used BFD for LDP convergence. Can anyone explain way convegence will happen in my mpls core. If I am using BFD for triggering my IGP convergence. With BFD hello timers of 50ms & hold timer of 150 ms.
