We are beginning to install MPLS. We would like to install MPLS over a DS3 between a 7206 and a 2811. I am concerned that we will see performance issues with the 2811. Any ideas? Is there anyone doing this?
Hello all, Does the 3845 router supports all the managment for MPLS and the protocols ISIS & BPG? What about the interfaces STM-1, could they be used for MPLS? I'm planning to use this routers in a Core backbone, not only in a large enterprise networ...
Hi,I'm creating DHCP server at 7200, and creating DHCP relay at my 7609 to distribute IP address for multicast VRF. DHCP server is work at my local 7200, but seems the relay is not working. The config is like this:7200:ip dhcp pool Test-1 vrf Multi...
Hi I would like to know about the LSP ping message generation in a dynamic LSP and static LSP environment. Is the LSP ping messages generated automatically upon the creation of LSP (both static and via LDP) ..? or is it generated administratively.If...
Can somebody let me know how to configure mpls.Command line especially at client side.I did it some a year back but forgot what all is required like encapsulation etc.Reg,Sushil
Hi all,I ve read EoMPLS will not work on interface VLAN's in 7600 series routers... Is it for any specific IOS bug (if so is the same be fixed?) or the platform itsefl will not support... Because we have an EoMPLS customer who is not able to work on ...
Hi,I have a scenerio where i wish to configure a TE tunnel to run across a link which is only utilised as a backup link by the current MPLS network.Am i right in assuming the RSVP bandwidth reservation carried out by the TE tunnel would not be seen b...
We have a headquarters 4.5 multilink line going to an MPLS cloud supporting 14 remote sites. We have now unwisely aquired a "managed" VPN failover "solution" for 4 of these remote sites utilizing HSRP. The problem is the black holing caused by BGP la...
Is it possible to create MPLS network only with the use of P and PE routers? In other words, is it possible to integrate the functionality of CE routers in PE routers. In this case PE will act as CE and PE.The idea behind this is that we are trying t...
We have a 7206 vxr NPE-G2 w 2Gig of ram.Currently we have 3 full route tables and have the need to add MPLS support to our network.We are currently using:c7200p-is-mz.122-31.SB8.bin Our main requirments for IOS are:1. bgp2. ospf3. mpls4. VPLS I have ...
I have a network in which the voice(IP Phones) run through vrf. all other networks are carring IP traffic. Now i have to add IP phone in a network that runs IP traffic. Is it possible for me to redistribute the new IP phone, which carries normal IP p...
which route or update will have MPLS assignment?BGPOSPFEIGRPRedistributedI read that BGP updated route or prefix will not have the label assignement.....why?
Hi,MPLS is not really my thing but I am trying to get it working between a cisco 7200 and a third parties juniper. We can't get the 2 to see each other as MPLS neighbours. I am probably doing something fundamentally wrong but don't know what. Here is...
In cisco L3VPN how are routes in the normal routing table handled? Is it treated sort of like a VRF with no RD? If so how are routes leaked from it into the vrf's and vice versa?
