Hello,We have an old CME on a Cisco 2921 router.A user is trying set his phone to call forward all calls to an external number.It works when the call comes from an internal phone but fails when the call comes from an external number.When it fails (ex...
Forum Posts
Colleagues, I continue my struggle with jabberThe problem is as follows:Cisco Jabber for windows connects to a local network and is fully operational (chat, phone service)Cisco Jabber for android connects externally via MRA and is also fully operatio...
Resolved! Voice is not working in Cisco Jabber
Hello, friends, help me.,I have configured the expressway c\e vX14 bundle package.3.7, CUCM v14.0.1.13900, IM v 14.0.1.13900everything works from the local network, cisco jabber connects, calls and voice passesBut from the global network, the chat is...
Good morning,I have enabled LDAP synchronization for a test OU. Importing all users into the OU also works without any problems.Unfortunately, the custom filter does not work. Users who do not meet the attribute are deactivated, but users with the at...
My mailbox and another test mailbox I have do send email notifications at 9:00pm for example. Others that have the same settings in Notification Device Details will not, and the email will be sent at 8:00am. Looking at the details they are both ident...
As per Cisco PLAR can be configure for sccp and sip phones but when i m trying to do on third party sip device sip dial rules option is not available.
hi expert,Cisco ATA 191 lose Web Access GUI after register to UCM 12.5Does anyone know why and what config cause it? As soon as it register , then It is not accessible in Web GUI.I have enabled the web access and also set admin password on UCM page,...
Resolved! Cisco 8300 Max SIP Sessions
Hi I have customer who wants to purchase an ASR 1001 as a replacement Cube but I recommended the 8300 series routers.The customer is looking for a device that can do at least 12K SIP sessions and I cant' find any information on the 8300 if it can do ...
If we have CUCM and IMP version 15 along with Jabber, is there any way to integrate Jabber with Microsoft Outlook so that users can place calls directly from Outlook? For example, by adding Jabber as a plugin to Outlook or through any other method?
I am a user. A couple of years ago the company took our desk phones. They said that we would get email notifications if anyone called our old phone numbers. This may have happened once or twice. Recently I have been getting emails from Cisco Unit...
Hello,I have the following in a TCL IVR 2.0 script on an ISR:for {set i 0} {$i < [string length $dtmfString]} {incr i} { set digitToSend [string index $dtmfString $i] puts "#### Sending $digitToSend" leg senddigit leg_outgoing $digitToSen...
I have a SIP trunk on a C8300 CUBE/VGW. External calls route through CUBE on the SIP Trunk dial peers. There are no issues with inbound calls to phones, or anything else I have configured with it (other T1's, SIP Trunks, etc.) The particular MGCP gat...
Resolved! DN and Licensing
If I build a DN that does not physically appear on any phone and is only used to forward calls, will it consume any license?
Hello Folks, I am facing one issue with Incoming calls and looking for your support. Call Flows are as follows. Successful CallPSTN User (9XXXXXXXXX) -- PRI -- Voice Router -- MGCP -- Call Manager --- SCCP -- Analog Gateway -- Analog Phone. Failed Ca...
Hi team, Is there any way to disable Web Access directly on the CP-8865-K9 IP Phone without going through CUCM?Can you support me ? Thanks team,
