Network Access Control

I have integrated MARS 4.3.1 with ACS but I need to know how I can assign privilege levels for the users on the ACS for different privilege on MARS.

HIIn my router I am configure AAA authentication default login and default enable password from ACS. so when I login my router then login password and enable password come from ACS. I am also configured login default local. my problem is if ACS down ...

Hi,We have Two DataCenter one in INDIA and another in HONGKONGWe want to deploy ACS at both location and ensure if ACS Server in INDIA is down then users can connect through HONGKONG ACS-Server.....<Q1> How many licenses do I need for ACS <Q2> How wi...

I'm currently experiencing problems with the installation of the ACS-certificate on the client. I'm using an external CA-certificate that is correctly installed on the ACS-server (see other topic). Now the clients also needs the ACS-certificate to be...

We have read from the installation guide for windows ACS 3.3 and understand it is supported only on Win 2003 standard edition service pack 1. As MSoft has release Service pack 2, not sure has anyone out there tested ACS 3.3.4 on windows 2003 standard...

On the Windows version there is the command line utility which allows for the bulk import of users and clients. With over 250 TACACS+ client to install on an ACS appliance I do not want to have to add them in manually, one by one, but don't seem to b...

Hi I have a question in regards to tracking users. My company is looking into getting an ACS server but they also would like to know it is able to track user log on and off and from what location. Is that possible with the ACS? And is the ACS able to...

HiI use acs 4.1 under "Reports and Activity" -> "TACACS+ Accounting" I can see some start/stop reportings.But under "Reports and Activity" -> "TACACS+ Administration" I can't see anything...What do I have to configure at least???Thanxbb

We have CSACS 3.2(3) where users are configured with an internal SecurID account, with the unknown user policy set up to query our Windows 2000 AD for wireless users. A user might have two entries in the database: a static "matt.melbourne" RSA SecurI...

Does someone know if ACS 2.3.6.2 can be installed on Solaris 10, and if it works fine?The official documentation (Cisco Secure ACS for UNIX Compatibility) says that ACS is compatible with Solaris 9, but does not mention nothig about Solais 10.Is ther...

Hello,How does one configure a network device in ACS 4.0 to authenticate using both TACACS+ and RADIUS? Bascially there's only one option from the drop down list that can be selected.Basically I have a Cisco switch: I want to use TACACS+ for remote a...

Hi NetPro,I have one ISA 2004 server configured with Microsoft Radius Server (IAS).ISA 2004 acts as a Radius Client, and IAS is the Radius serveur.Every user will be authenticated on the IAS server before getting access to the internet.I am discoveri...

Hello All,I am running into trouble when i try following configuration on Cisco 1800 router with 12.4(6) T IOS.Requirement: - Disable basic commands like disable, enable, exit, help and logout when i push ? from > prompt.Steps performed:-aaa new-mode...

I have configured radius on my 4006 router module and for whatever reason it is not authenticating. Now I am unable to gain access to the module. Any suggestions of how to regain access to the module? I am currently unable to access to be able to ...