I cannot locate the mib object to use to set speed and duplex on 4510 switch ports. I have found this for the 3750 switch in the CISCO-STACK-MIB, but this mib does not apply to the 4510.
I cannot locate the mib object to use to set speed and duplex on 4510 switch ports. I have found this for the 3750 switch in the CISCO-STACK-MIB, but this mib does not apply to the 4510.
If I make cred changes to devices in DCR, how long until RME syncs up with DCR for those changes? thanks
I have been trying to get snmpv3 with sha and aes encryption to no avail for a couple days. Does anyone have any sample configs that might work. The few I found on line were kinda helpful. I am using Cisco works as my net management station....the...
I have CSM and CWLMS servers implemented in the network, i needto integrate the common services modules of both.. There is a possibility?Somenthing of Multi-Trust Server..And for the license of CS module of CSM..CSM 3.2 (CS 3.0.1)CWLMS 3.0 (CS 3.1.1)
HelloI have LMS 3.0 installed. When I access from a remote PC, everything seems to work fine. However, when I try to access from the CiscoWorks icon on the server it is running, the following sequence happens:- I open CiscoWorks and the authenticatio...
Dear All,IN our network we are using Ciscoworks LMS 3.1.Cisco works process FH server, Tomcat Monitor, WlseUHIC went down.It was displaying error that administrator have shut down the process.Again we have manually start the processes.What is the rea...
my client has LMS2.5 and now is updated with RME 4.0.4 and Common services 3.0.4,the device package that supports this particula rmodel WS-C2960-8TC-L needs MDF1.6 which I found a downloadable file howver it says it needs common services 3.05 which o...
Hello!I need MIB OID for CPU utilization on router 2811.May be somebody does know it?
I have a strange problem when using baseline templates in subinterfaces:It only works for the first 18 subinterfaces. It does not matter which value I run compliance-check on or what action I do based on the compliance. This is an example:I create a ...
Hi,Does any one have a method by which to get my CUCM Servers registared to LMS so I can see Phone numbers.I have the Servers Registared fine but can not see the CUCM Cluster I have seen other Conversions mention.ThanksIan
My LMS version is 3.0.1, running on Windows systems. I have deleted some devices because of alias devices. But after running discover devices, devices that I have deleted appears again. I try to configure discovery setting >filter setting,but I could...
Devices are unable to import to DCR aft re-installating of CW LMW3.0. Before, un-installation, all devices are unintentionally deleted from DCR. However, after re-installation, a few proper Device Discoveries have been done to ensure devices are disc...
Performing the integration of CWLMS 3.0 with the ACS 4.1 appliance, access to the portal be very slow, the integration was sucesfull and the modules operate correctly.. the problem is the slowness.. Reviewing the traffic between them i found that CWL...
Hello,When using the "cwcli config comparewithbaseline" command, one of the parameters is "-view" followed by "name". We're having trouble figuring out what that is, how to use it, etc. I have uploaded a screen scrape of that section of the documenta...
Hi,Could you please help me with this?I have installed a CSM v3.2.1 with SP1 and, when I try to use the CSM Client, an error occurs and I can't start the application.What can be the possible problem related with that?Thanks in advance.RgdsDaniel Feri...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-03-2024 12:07 PM | ||
09-19-2024 08:55 AM | ||
09-18-2024 05:45 AM | ||
08-21-2024 03:45 AM | ||
08-18-2024 09:11 AM |
User | Count |
---|---|
3 | |
2 | |
2 | |
2 | |
2 |