Network Management

Hi,I'm trying to add CoS classification to traffic coming in from access ports that are on vlan 2551.  I did a match any with VLANs and access-group match statements to see if I got any hits.  The policy-map stats for the example interface are below....

I have implemented secure logging on our Cisco ASAs via 'logging host ip.address tcp/6514 secure' and then adding the proper certificates. For the switch I have tried "logging host ip.address transport tcp port 6514" and i have the proper cert instal...

Hi to all, as i was looking in two of our switches i found out that Prime "decided" for the first switch to assign a VoIP Phone port as link port and in another switch which had exactly the same configuration in the voip port as the first switch , Pr...

4331 router with ucs-e140s module.  Ran a session from CLI in the router. Now at the "CISCO-IMC login:" prompt. What's the command to get out of the session from there?  Ive tried Ctrl-Z and Ctrl-Shift-6 x with no luck among others. 

I have the problem of the DHCP handing out the old DNS entries in Cisco Router IOS-XE. There is no DHCP server configuration in the router but when i run the command show dhcp server it gives me the old DNS entry which i configured last week and remo...

been searching the KB but can't seem to find the the correct reference is the throughput level in isr shared between ingress and egress? if i have 400M throughput will be shared inbound and outbound traffic or dedicated  thank you

Hi All, I have IPsec crypto configuration available on one of my router. Crypto map is configured with local-address command with WAN interface. But crypto map is not applied on any interface. As per my knowledge, if crypto map is not applied on any ...

Im am playing since a while with templates in prime infrastructure and deploy it to my switches.Now I want to create another template to clean the flash from old images with the following command: request platform software package clean switch all fi...

Is there any definitive info about e.164, such as is there a global time frame for implementation ? (Doesn't seem like all countries are/will utilize it).

Hi,  Is there any list of technologies or items that increase the memory utilization like BGP, OSPF, etc and what is considered a high level of memory utilization?I have an Cisco ASR 9010 Router. Thanks,Aridy 

Greetings, would anyone who has personal experience configuring a ASA 5516-X Firewall be able to give me their input? What features are turned on by default when it comes to security along with layer-6 security and what features are not on but you re...

 Environment:I have the interfaces Ethernet 1/1, Ethernet 1/2 and Ethernet 1/3.My goal is:Manager can do the followings commands on Ethernet 1/1 and Ethernet 1/2:Change the ipSee the descriptionDo shutdownManager can do the followings commands on Eth...

Hello again all,Not sure if this is the correct place for this post but I have question regarding TLS renegotiation vulnerability showing up for the 3750X switches at a client site. Some of the switches are a bit behind on the IOS upgrades (some goin...