HiI try to tune our FWSM a little bit for performance like it's described in https://supportforums.cisco.com/docs/DOC-12668Our FWSM is on 3.2(18) and the CSM is 3.3.1 SP2.I need to add the following:admin context:Sysopt np completion-unitsysopt conne...
I am working on the ASA5520 upgrade from 7.2 to 8.4. The upgrade path shows I need to upgrade from 7.2 -> 8.0 ->8.2 ->8.4. First I added the 2Gb memory on the ASA. It accepted without issue. I tried both IOS 8.0(2) and 8.0(5) (I checked the download ...
/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in ...
Hi,I have Cisco ASA and i have connected Exchange 2007 Edge Server in DMZ and Client Acces Server in Local Network. Can anyone please tell me how to configure the ASA for this?Thanks,
Hello,I need to create a separate internal network for a classroom inside our existing lan. Topology is as follows:separate lan - 3560 - trunk - 3560 - asa5520 - internetMy requirements are;The separate lan will need one public ip for about 30 hosts...
hello out thereI sit and wonder about how much I can push through an ASA5510 - HTTP traffic - ftp and everything else is running so close to "wire speed" as can be expected.I downloaded a "Test Module" from Ookla (www.ookla.com) - it is the same as u...
hi folksam coonection remotaly to the asa with aip-ssm 10,how to lanch the IDM to manage the module,i prefer IDM over asdm10xs
hi folksI wanna let some users access outside application through the firewall,so what is the proper config for that?inside (sec 100)outside (sec 0)so will the access-group applyed in direction on the outside or out direction on the inside interf...
HelloI want to publish servers on the outside interface of an ASA 5510 with 8.3(2). I does not work for me! I can put them on a own ip but not the interface. The logs say "Denied by ACL" but no ACLs are incremented and show nat does not show any hits...
Strange issue this,I have a flickr upload tool, when using direct through our ASA5510, upalds are fine.The problem is when the request comes via our proxy using ISA2000 it never works (my pc > proxy > asa). Watching the logs, the destination port see...
hii am confused if we arehaving a public ip 199.X.X.11 of inside server given to its nic and is behind asa inside and asa external range doesnot fall into that will i be able to access this server from outside .the access list is applied on the outsi...
Hi Folkshow to start troubleshoot the Below:the user source address 172.16.3.2 (Behind ASA-1the destination SIP Server: 10.100.100.100 (Behind ASA-2)packet-tracer input outside udp 172.16.3.2 4263 10.100.100.100 sipPhase: 1Type: ACCESS-LISTSubtype: ...
Hi, I'm a bit confused with the new ASA versions Cisco has published (8.3 and 8.4).What is supposed 8.2 users have to do?Cisco is not going to evolve 8.2 anymore? making it a must migrate to the new concept of NAT? or 8.2 with standard NAT will conti...
Dear all,When I log on to the IPS module of my ASA, i see many signatures with with risk rating of HIGH but they are not activated(ENABLED). I dould if it is advisable to activate all those signatures with risk rating of HIGH in the IPS. I believe if...
Hi ,I have ASA 5505 with base license and IOS version is 7.2(4). I configured both site to site vpn and Remote Access VPN. Site to Site VPN is working fine and also Remote access vpn tunnel came up, remote user got IP address from the firewall. But ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 06-05-2026 10:49 AM | ||
| 05-26-2026 07:54 AM | ||
| 05-02-2026 06:09 AM | ||
| 04-30-2026 12:46 AM | ||
| 04-24-2026 07:04 AM |
