Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

hiif i want to compare packet cptures on asa with the syslogs , how will i come to know that both are taken simultaneosuly i.e what is the confirmation which will conclude that both are simultaneous .what parameter i need to compare in both . how to ...

/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-...

fsebera by Level 4
  • 2616 Views
  • 9 replies
  • 0 Helpful votes

i am confused over lines for allowing traffic between 3 asa zones.internet (level 100) - 198.65.34.22businessapp (level 80) - 172.16.24.1 255.255.255.0local (level 0) - 172.16.15.0 255.255.255.0 172.16.24.10 is business server ip on dmz. it should be...

suthomas1 by Level 6
  • 1120 Views
  • 7 replies
  • 0 Helpful votes

Hi guysHas anyone tried a vpn tunnel between ASA 5510-cisco 1811?.There is a slight variation in the crypto command. Also there is a slight variation in the class-map, policy-map and zone security commands. so if i configure a IPSEC VPN on ASA 5510 h...

I am new to cisco and have a question about upgrading the ASA and ASDM. We have a new 5510 that shiped with ASA 7.0(8) and ASDM 5.0(8). I have uploaded ASA 7.2(4) and ASDM 5.2(4) via the Gui but how do I get it to load the new .BIN files? Thank...

thellco01 by Level 1
  • 1312 Views
  • 4 replies
  • 0 Helpful votes

vpn

hi! how do i check what vpn protocol the client's pc is using? eg...ipsec and etc? Can the checking be done from the pc end? we do not have much access to the firewall. The issue is that the external vendor is trying to establish a vpn tunnel out fro...

dkblee by Level 1
  • 379 Views
  • 1 replies
  • 0 Helpful votes

HI al.I'm trying to update two different FWSM on different chassis with version 4.1.3In both FWSm the result is the following:FWSM# copy tftp://192.168.222.215/c6svc-fwm-k9.4-1-3.bin flash:Address or name of remote host [192.168.222.215]? Source file...