Hey dearest community! I have a problem with deploying any changes to my ASA 5508-X running FTD 6.4.0.1. I found out already how to create and display the deployment log (exper, sudo su, pigtail deploy).It is failing with any changes, regardless what...
hi all i have asa 3des license key and i cant add the activation key using cli because i unable to go to configuration mode (no config t command on cli ) im using FTD local managing the asa EGCAI01-Firepower# show version---------------[ EGCAI01-Fi...
May I know how many VLAN sub interfaces can be created in each interface of FPR 4145?
Not sure if this is from a FirePower update, but... Recently we started to get numerous DCE2_EVENT__CO_BAD_MAJ_VERSION (133:27:2) messages from Firepower Management Console. These messages indicate a source of our internal email relay going out to O3...
We have a client that wants to migrate their ASA 5525X AnyConnect configuration to an Firepower 2130 running on FTD code, they have these feature currently enabled for AnyConnect: Dynamic Access PoliciesHost ScanSAML SSO Last summer I had another cus...
Hello everyone,I'd like to use an SNS3415-K9 for my lab tests. It doesn't have an HDD. So I have a few questions:1. I plan to install only eval image. For evaluation, the HDD requirements is 200GB (https://www.cisco.com/c/en/us/td/docs/security/ise/2...
Is there any way to export Cisco Firepower FMC configuration using CLI mode? Cisco Firepower FTD case I am using "show running-config" CLI command to get configuration data.
Hey, pros, I've determined that an Implicit ACL is causing my Mobile32 traffic to drop in Phase 3, BUT it's not so kind as to give me which rule is dropping the traffic. If you're me, what's your next command? What command would you enter to see what...
I like the CLI. My counterpart likes ASDM. Sometimes when troubleshooting I need to see if he made any recent changes. What command(s) would I use in the CLI to see recent configuration changes made in the ASDM? Thank you so much, Alan
Hello, I use Cisco ASA 5516-X with Firepower.After upgrade to Firepower Service 6.3.0 my Cisco Firepower Agent for AD can not connect to Firepower Services.6.2.x - work perfect.Error : Report login information from localhost to x.x.x.x failed aft...
Hello, I have an ASA 5545 with Firepower services, In the ASA we have the Service Policy Rule as show:From Lan Network to Management Network and viceversa then bypass,From any to any then send to the SFR device. In this case all the trafic that doesn...
Are WEBEX calls protected A, B or C classification?
Is this common(known) issue? When I configure one or two captures on the FTD(CLI or GUI) the device CPU increases by additional 20% even when the capture is full and Stopped/Paused.I really did not saw any difference if I change the captures buffer s...
Hello,I have been asked to upgrade a pair of ASA 5555-X with FIREpower service, they are managed by a FMC, they active/standby, I would like to confirm with you guys if when I click install on the cluster the upgrade will be done automatically, 1) i...
Hi,I have an ISE radius server on the other side of a L2L tunnel and I need to authenticate some RA VPN clients that's connecting to my local FTD 1010. If I test from a radius client on my network using a radius test tool, I have no problem reaching ...
