Other Collaboration Subjects

Anyone ever come across a Unity server(2.4.6) mysteriously locking up every so often? The server appears to be working fine, but it locks up hard every so often and needs to be taken down dirty and rebooted.<br>Any ideas???<br><br>Alan White<br>SBC<b...

I have a problem on a CCM 3 with the IP 7940/60 phones. Sometimes the IP Phones will display the corporate directory and sometimes they will not. The problem seems to be random. I have the Call Managers entered in DNS and all that seems to be wor...

We want to setup a test environment as we are planning to migrate from 2.4.x to 3.0. It is actually going to be a new install, and we want to test import scripts etc...<br>- Does the Unity box need to be physically connected to the PBX, or does havin...

Call Manager 3.1(2c) w/ 7960 and 7940 phonesAdded User Device Profiles w/ 7960 2-Line profiles (7940s don't appear to be an option) and added the Login/Logout Services.Added the Users and associated them with the profiles.Added all of the phones (usi...

Howdy all,Is there a CCO bug saying that MCGP will not work for FAX using an FXS port on a VG200 gateway. Is it true that you have to use H.323 for fax to work ??Need clarification ... pls...

when trying to 0 out to an operator from the main greeting on 2.4.6, it doesn't transfer the call to the operator but rather loops a greeting back that says "sorry the operator is not available". Any ideas?<br>jwatkins@consonus.com<br><br>

I'm trying to set up a call handler that will ring an external bell. No matter what extension I put in, Unity gives me a message, "Extension requested is not available now". We're running build 2.4.6.102.<br><br>

An earlier post questioned whether it was better to employ RSVP or utilize the Call Manager for CAC and I want to share my own experience.If my take on the subject is incorrect, by all means add a follow up to correct the facts. I have only been invo...

I have a few sites with a small staff of around 10 people. We use centralized call processing and SRST as a backup. Recently, our backup kicked in at two sites due to a network outage. Everything seemed to work fine, except for one thing. The mai...

I have a partition named "BillingInternal" and have double-checked to make sure all devices, etc are not using it. However, when I try to delete this partition, it tells me it is in use by a CS, CM or NumPlan. I found that the NumPlan table has a ref...

Anyone know any good console access servers that allow dialup as well as lan access? Dial access is unfortunantly required so security's a big concern. My requirment is an out-of-band management for up to 8 devices over a single pots line. I've be...

Can someone provide me specific reasons why a 6000 switch is better than a 4000 switch for IP telephony?I understand that the buss/backplane in the 4000 is one issue, what are some others?

I have tried to download the Unity 3.0 CD's twice off of CCO 1,2,3,4,5 CD 2,3 unzip fine 1,4,5 give a corrupt file error. I just want to demo it and see if it fits for us.

Does anybody know how to block incoming calls? I want to block incoming calls to one of the extention to only few numbers but can make outside calls without any problem.Any ideas?

During the initial CM install, I had chosen backup to Local directory but now I need to backup to tape device. How can I make this change ? Thank you very much for help.Duc Vu