Other Network Architecture Subjects

Hi, Have a query about Frame-Relay traffic-shaping; When should the traffic-shaping start delaying traffic (i.e. moving traffic to traffic shaping queue) ? Reason I am asking is it seems like my Cisco 7206VXR starts delaying traffic much too early (i...

Hi, How to trunk between nortel and cisco. let me know urgently.or pls give me any link so i can study rgds,ciscobuddy

Hi,I have a 6509 with sup2/msfc2 running Catos 7.3(1) and IOS 12.1(8a)E5.I need to upgrade the IOS to 12.1(20)E3, but the MSFC2 bootflash doesn't have enough space to keep the boot image and the ios image, so I try to load it from the sup-slot0: card...

hi i m already having one channelised E1 PRI line connecting to my 3660 which is currently being used for ISDN Dialin for customers.new request has come for Analog PSTN Dialin to our POP .We want to use the same PRI line terminated for this purpose ,...

I have a basic question again :)Can a routing loop occur in a scenario as:10.x.x.x router1---------router2 192.x.x.xBoth routers running RIPThanks Bon

Hi ,I have a very basic question,Can anyone please explain me definition of these terms in a practical environment:What is meant by Broadcast Multi-access networks, an example is Etehrnet...But what exactly happens for which it is called "Broadcast" ...

Whenever I start the Golbal Console, I need to choose a Global Manager.When I choose it one in the list I receive to kind of errors: A- "Cannot attach to Global Manager" or; B- "Error: Selected Entity is not a Global Manager"for A I choose: NCM-dc,...

My network is as follows.7206 and 3620 routers connected to a 3524 (port 1 & 24 respectively) using dot1q trunks. In the 3620 I have configured 2 sub-interfaces (vlan1 and 200). In the 7206 I have configured 1 sub-interface (vlan 200). And use the in...

hi! anyone can help to check whether the access-list shown below are able to meet the following requirements. Thks!1) .9 subnet are able to access only 10.71.12.65 and 10.71.12.68 subnet except host .9.93 and .9.88 whereby there can access .10 and .1...

Hi,We have 3 switch stacks connected via ethernetcable. The switches in the stack are connected via gigastack. We have 4 vlans. The ports connecting each stack, the gigaports connecting each switch in the stack and the port connected to the router is...

i could not find ip plus feature set in 12.3.8.T when i wanted to download it for 2620XM router.What is the alternative.regards,

I have a several 7200vxrs spare availbale along with 3550emi.I need to have a layer 3 device with only 2 fast Ethernet connnections, and they will be doing routing. Which is better to use? which had better throughput?and what re the limitations over ...

My Cisco 2511-RJ has developed a problem. When i turn it on, it gets restarted in few second and this problem remains until i power it off. OK Led is blinking and output on console is as follow"Copyright (c) 1986-1997 by cisco Systems250System Bootst...

Can we tell OSPF to generate the "default route" for a particular neighbor but not all neighbors? Like in BGP we could tell which neighbor should get default route. Thanks,