Other Network Architecture Subjects

HI GuysFor Me its seems like that when you are using UTLite.exe to give you Usernames, the UTlite.exe is running all the time on the user PC, taking up memory and ressources. Is this the meaning ? If the UTlite is activated in the login script, why d...

When redistributing static routes into OSPF and filtering so that only selected static routes get redistributed, I am aware of two methods:1) Using a "distribute-list x out static" command under the OSPF process with the appropriate access-list x whi...

Hi, I am wondering if there is anybody who can give me some pointers on how to setup BGP asymmetrically.I need to do it as my company is providing DVB services to our customers and they wanted to do BGP with us. As BGP is symmetric in nature, meaning...

hi we hve bgp peering with 2 diff isps .ISPA/ISPB.our main goal is to have load balancing,redudancy.we have configured the routers to meet the same conditions.but right now the load balancing is happening but reduandcy is not working i.e., if one lin...

Hi groupI have a problem between my 1750 router with Fasteth interface, and a 16 port Hub (3 Com) I set the speed to 10MB and half duplex.The PC's connected to the switch can ping the router fasteth interface. When the entry in the arp table times ...

Hi, I need to upgrade DRAM/Flash onto a WS-X6K-SUP1A-GE with MSFC. I have found a link:<http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_14357.htm> where shows that the replace of the MSFC1 is not recommended becouse supervisor...

I had some information from a co-worker that version 12.8 is out. Can anyone confirm this?

I understand that at the switch level "cgmp enable" will keep multicasts from flooding all ports on the switch and keep performance humming. But I see that at the interface level in at the MSFC you have the option of adding "ip cgmp" on that interfa...

Hi all, without "dialer watch-list delay" , how to add delay before dialer secondary line?BRsBiao

Is there anyway to do nat on a one arm router? I need to nat an inside address to a global outside address.

I have some sites which advertise the networks with RIPv2 to the backbone network. There are 2 backbone routers to collect these sites. Backbone routers are running BGP with other backbone routers. I would like to balance the sites on both backbone c...

We have several FRATM and ATM WAN links that do not support CDP. What can I do to enable CDP to work over our ATM network?

Can someone suggest to me the correct syntax to specific a proxy url in System Configuration of RME?My proxy is 10.1.1.1 with port 8080.I have just tried with 10.1.1.1:8080 and http://10.1.1.1:8080 without success: my ticker windows is old (march 200...

Hello,I have a large network running multicast. There are approximatly 50 sites which source multicast traffic. Each of the sites has 2 devices (main and standby) these both communicate permenantly to multiple receivers on the same group. This is a ...