Other Network Architecture Subjects

Hi,{According to this BUG ID CSCdr00948 "Cannot create or open scenario in Essentials 3.1"ACL Manager 1.1 does not work with Essentials 3.1. You must install ACL Manager 1.1 (Patch1) for it to work with Essentials 3.1.}However, Patch 1 is no longer a...

i upgrade 7507 to 12.1.8AE2 ,but after 20 days, 7507 in restar status.who can help me qz7507-2#sh tac Server: 134.140.9.48/49: opens=220 closes=220 aborts=0 errors=0 packets in=269 packets out=269 no connectionqz7507-2#sh tech ---------...

hicustomer use 3640 with asynchronous ports (reverse telnet) to connect on console's port of IBM AIX servers. (3640 as console server) in orderto manage Server remotelyall work great except when customer issue a restart/reboot of Aix serversfrom reve...

I have a TAC case open with this, but I wanted to see if I could get some ideas from anyone here. All documented configuration is v. simple and straightforward, but something is amiss. Any pointers, advice would be great:Here's a diagram of what we h...

I have to ship a router to india. What power cord should I order

Need some help here!Right now I have a Gigabit wireless bridge that connects two sites. These bridges are connected to a L3-2948 switch. I want to implement a backup 802.11 wireless link between the two buildings. The gigabit being the primary and...

I have a Cisco Catalyst Switch 3550 with default VLAN1 and some other VLANs configured.I intend to connect to a Catalayst 3508 via a cross cable using the 1000TX GBIC on both switches. The Port on 3550 is on the default VLAN1 whereas the Port on Cat...

Good Morning All,Here is my question. My Goal :To assign ports on my 5505's to the IP addresses of users. 1. Can I use Cisco Works ? or do I have to manually go around to each user, etc, etc. ?2. If I click on the port (using Cisco works) can it tell...

Has Cisco addressed the OpenSSL vulnerability disclosed by the CERT?http://www.kb.cert.org/vuls/id/JARL-5CHKA5OpenSSL 0.9.6g has fixed the bug but CW2k uses 0.9.6c.Thanks for the help.

Hello sir, When i use ciscoview. I point to the graphics of ce1 module in ciscoview. I wanted to use the monitor function (by click the right button). But it seemed I can't monitor the logical interface's traffic. I can see zero traffic on ce1 physic...

Does Cisco offer any downloads of Network monitoring tools for the WAN/LAN. We don't currently have any tools to perform network analysis. Can you recommend any or give me the links to download them.We are experiencing some slowness in our WAN from...

I downloaded the Visio stencils for Cisco products. Wouldn't you know that the item I need the most is not a part of it......Can anybody help me find the 3660 series?Thank you.

Hi... I installed the nGenius software (performance monitor, sniffer ... ).I want to monitor a Router with that software but i need a probe for do it. So i want to know if i need a nGenius Probe or there are other Probes Compatibles with nGenius S...

I am using CW2000, Campus Manager 3.1, and cannot get User Tracker to work with my Cat5509's that have SUP III's and CatOS 6.3(6).User Tracker works with my SUP II's with CatOS 5.5(14).Can you tell me how to get User Tracker to track the ports with C...

Does anyone know of a software product that would allow me to monitor or track the ip conversations going across our WAN links. We currently use CW2000 with probes to do some of our circuits. We have added several circuits in the last year and I don'...