Other Network Architecture Subjects

i am tring to setup a 5508. 15 of the 16 aps will be at a remote sitethe 5508 will be at HQ (would like this)at the remote site i have 6 2960-s and a asa5510this site is a sub site of another site the vlan 1 will be part of the main site which is con...

Hello,I'm working on options for a small DC switch design.  This DC has 5virtual hosts with 10-20 guest vm's each.  Each server has two quadport gig nics with 6 of the 8 gig ports connected (3 for iSCSI and 3for data or management.  It also has two 3...

I have a client of my that contracted with some RFID company in CA to setup up the HQ ASA and 11 5505they set up VPN to site to site on all sites back to HQ.now that i am there the client want to add another 2 web server on the inside of the fire wal...

Hi All,I need to find an iOS version that supports BGP, Dot1q, and MPLS for either a 1800 series or 1900 series not sure the best place to find this sort of info out.Sorry if this post is in the wrong section.Many ThanksLeeSent from Cisco Technical S...

Since these switches don't really have a large buffer size and they do have issues with jumbo frames.  Can any one share their experience with these switches?  We are looking to go with top of the rack model in the data center and even though we do n...

Hello All,Can someone please tell me if the CCSP certification has been retired and what it has actually been replaced by? Also, what are the requirements to becoming professionally certified in security?Unfortuantely, Cisco's website doesn't make it...

Model: C2950-S24Serial No:FOC1014Z16U

Which layers of OSI reference model are addressed by the ITU-T ISDN Standard ?

Hey everybody. I'm trying to come up with the best solution for this topology. The descryption is as follows:A small company with 50PCs, 10Printers, 5Web Servers and 5 IP phones is functioning in two places. City A - the main branch and City B.Now I ...

We are running a collapsed core so the closet switches are directly connected to each core switch via a layer 3 point-to-point link.The closet switches are in OSPF area 1 as are their links to the core devices.The link between the core devices is in ...

Hi, Can somebody advice , how can i have dhcp server redundancy in my network. I need to design a network that will have around 30 vlans spanned across 50 buildings.

Hello everybody!I am going through a network problem  and I believe to be some problem related to network design.Our network is distributed in two sites, each with 2 routers interconnected by two different data link.The main link (fig.) is connected ...

HiI am not after any help with the design (at the moment, but you never know), just looking for a simple design docment template for me to change to do a HDL for network I am working on, new LAN and WAN but not a huge project.can supply my email to a...