Other Network Architecture Subjects

Can anyone provide me a sample for the community strings used by the ANI Server that they have used for their network? The syntax Ciscoworks 2000 lists is as follows:target:read_community::timeout:retries::::write_commmunityThis is just a little amb...

Hopefully this is the correct topic string.Has anybody seen a fault where Gigabit 2 port disappears,and you are unable to interactive with it.When rebooted the switch boot ok, but adds a "FRANK-3-BIST_PHASE-FAILURE" fault statement.Is this a return t...

HiI need your help on following question. I'm planning an upgrade in my network from existing 3640 router to 7200VXR along with replacement of Sup I in Cat5k to Sup III. After the upgrades I need to segement network into VLAN's. I've heard from relia...

Can I connect two 2950C-24 switches with 100base_FX ports.Can any one please assist me in this.Thank you

With Cisco 801 (IOS 12.0)Is it possible to stop connections regularly, for example all the weekend from Friday 18:00 to Monday 8:00 ? I only find the "reload in|at" command to schedule but it is not sufficient.how to make?

Hi I have this doubt for quite some time.Suppose i got a leased line from an ISP,obviously im going to assign the valid IP from the isp to the serial wan port.If suppose i use a 1700 series router and for the ethernet port if i assign a valid ip add...

i have the fowloing configuration in two cisco 760 routers to make DDR connection betwen them.before i do this configuration i have already connect them to the internet using the "cisco fast step".the ip to the wan is unumbered.ROUTER A:Atlanta> cd ...

greeting.....i have a bgp session running with another AS whose link is terminating on my FE0/1 interface.i also have ospf running for my internal backbone netowrk.under ospf configuration.....FE0/1 has been made a passive-interface.....*************...

We use DHCP to assign the dynamic IP to our client's devices. For the devices that do not support DHCP we are forced to handouve static IP address.I am looking for a way to tie down this address to a MAC so that the allocated IP can not be hijacked ...

Hi group,I am trying to set up a test lab to test NAM implementation on our network, I don't know what equipment I need in order to accomplish this in the lab and collect info up to layer seven. How can you implement NAM on multiple 5500 series catal...

I am trying to track the snmp traps received from our switch (WS-C 4006). I have put the following OIDs in my snmptrapd.conf, but for some reason the traphandle did not respond to them:traphandle .1.3.6.1.2.1.17.1 traps newroottraphandle .1.3.6.1.2.1...

Hi all,I'm looking for a ifconfig to this equipments.If anyone have this, please send meBest RegardsRenato Anderson

Hello,for using two ISDN-Devices on a NTBA I have theneeding that either the Cisco Router do not"takes" incoming calls or only if a dedicatedMSN-number of the NTBA was called!E.g. MSN-Number are 123, 124, 125No the Cisco Router should never takes inc...

Hi,My customer wants to implement a redundant ACS system for authentication,which uses a redundant RSA ACE server for strong authentication of remote ISDN andPSTN dial users. I do have a number of questions whit this senario.# I have been trying to ...

How can I measure the traffic between to Cisco routers connected through ISDN? Thanks.