Does anyone know what the command to set on the router so that it query the switch for its addressing and only do so every 5 min.?
Does anyone know what the command to set on the router so that it query the switch for its addressing and only do so every 5 min.?
Does IOS support both RSVP and CR-LDP for use as a label distribution protocol
I have been expirence some response time delay between the divices that are installet in Vlan1 and the rest of the Vlan (6 In Total).The network have 6 4006, 2 3508 and 5 ,3524 every floor has a dedicated Vlan.Also the core swicth have a RSM module, ...
I am having trouble doing password recovery on a 4000 M+ test router I received. I followed the instructions on Cisco's site for password recovery on this model. Everything seemed ok (I was able to get into enable mode and change the secret passwor...
Dear All,How do I delete 1 of my IP Helpers that is on my FastEthernet 0/0.129. The two adress I have are10.1.0.1810.1.0.10I want to delete 10.1.0.18 how do I do it? (useing 3640 router)ThanksRifPS Any body know a good web site that goes thought this...
I have been running user tracking for awhile and all was well. Then I noticed that the new 3548s didn't have any users. User tracking doesn't seem to work on the 3548s. Has anyone seen/solved this?
My 6509 has two msfc2. One of them can log when I modified its config,but another can''t log when I modified its config. Both of their log config is "logging buffered 16000 debugging". why? thanks!
I have 32 E1, I want to connect those to router 3661,below is diagram:(3661)nm-8e1-ima-----32E1(SDH)------ATM,because the 32E1 is SDH Frame, os i use the NM-8E1-IMA, can it work? any one can tell me what's the function of nm-Xe1-ima, or documents lin...
Hi My existing setup is as follows.AS5300(chasis model AS53-120-CH)with1 Ethernet & 1 FE ports4 port channelized E1/PRI moduleIOS 11.2(15a)PI want to upgrade this to support VDPN using IPSec/3DES.What should I select ? Miuranga
I have installed ciscoworks2000 3rd edition. I am getting syslog message from the attached routers and switches. But i am not getting any syslog message from the call manager 3.11. But the call manager is getting recognised in CW2000. Is there anyway...
I experience this error from CWM when i move PVC from BPX as SPVC on an MGXii , has anyone seen this error before if yes can anyone update me the reason for it.
I've got some switches at our location and with one of them we move a lot of the cables around frequently (don't ask). I plug the cable in and the light turns on to amber. It takes anywhere from 30sec to 1 minute for it to go green. In most switche...
I am trying to connect a Cisco 1720 running IOS 12.1 to our isp. This is just a test to see if I can get internet connectivity before I move onto the more difficult tasks.It has two interfacesFastEthernet0 (LAN)Ethernet0 (WIC 0)The configuration or...
Hi,we are in the process of rolling out an IP phone system in a three warehouse office environment.The basic setup per building is 2 x 3524 inline power switches linked by a gigastack card.There is then another gbic card which connects to a fiber bac...
I am having problems with the following scenario. My client's network is at the far end of a FR p-t-p connection. Our core router is a 3Com (I know, I'm workin on it). The client's side of the frame is connected with a C1700 with 12.1 (8a) IOS.Bot...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-17-2024 11:08 AM | ||
07-17-2024 06:07 AM | ||
05-29-2024 04:52 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM |