Does anyone know how to clear out the configuration buffers on a 800 series router (other than a reload)?error:router#wr memBuilding configuration...% Configuration buffer full, can't add command: 10.10.10.10%Aborting Save. Compress the config, Save ...
I have got a 4506 switch with Sup V 10GE. This switch is in VTP domain, but in VTP transparent mode. I has got hanged twice, could anybody tell me the reason what could have happend. There was no configuration change been done to that switch.
Hello,I've encountered a strange problem while setting up what should have been a fairly straightforward 'router on a stick' config between a 1700-series router and a 3500XL switch. All is fine on the 3500; VLANs are on, switchports are assigned, tru...
Hi All,As i move from having my management vlan on 1 to something else, i am also going to readdress some of my router inside interfaces. currently quite a few of my router ints are sitting on user vlans. i assume this should be changed, but what i...
Hi Fellows;I have been pondering on this solution since morning but I now want to share with you the brain storming. We have a client that has proposed a change of ip addressing. The routing protocol in that is running on the router is EIGRP. With th...
I am planning to design a core network for a wireless ISP and I need some infomation of how deploying it.I have a E1 connection with 2 Mbps and a full class C Public IP's available. Which is the best way to take this issue? Is a good Idea with PPPoE?...
Dynamic Trunking Protocol (DTP), as the name implies is the protocol used to automatically negotiate a trunk link.For example, SwitchA and SwitchB are connected on their FastEthernet 0/1 interfaces. If both switches are set to access mode, then the l...
Do the 10/100/1000BaseT ports on the Catalyst 4948-10GE support Auto-MDIX like the 3750 does? We have a requirement to connect a 2950 to a 4948-10GE via copper (100BaseT) and need to know whether we can use straight or cross-over cables.ThanksAndy
I have created a stack with 5 switches. The problem that I am having is only four switches are being recognized. Stackwise cables look correct. So I checked the IOS on the problem switch and even put another basic config on it. when i use: sh ip int ...
Someone could explain me that problem could have, if I have the following situation: A dhcp Server, ACS Server, and various switches 3750 interconnected. But a hosts in the network has assigned statically one of the directions that the dhcp Server c...
