Other Security Subjects

I have two questions regarding Downloadable ACLs as it relates to PIX 515 E and ACS 3.0.2:1. How long after the user disconnect, the temporary ACLs created by downloadable ACLs remain on PIX and are visible thru "show access-list"(ie: access-list #A...

We are using PIX-525 and have three interfaces: Outside, Inside and DMZ1.Does anybody know the command to allow all IP traffic from dmz1 to inside interface?Thanks,Simon

HelloI want to use a solaris box as an NTP server but the cisco boxes use MD5. My questions are:Is MD5 supported on Solaris? If not is there an alternative that both support?

I'm trrying to understand a situation which has me puzzled. Part of theproblem is definitely not the fault of the PIX, but some of it might be. Ifanyone can tell me an exact order of operations on packets as theygo through the PIX, and when (and ho...

I am the Cisco user and this is my first time to use your poduct IDS-4210 Sensor.i have followed your instructions step by step from the document.Unforunately,in the part of initial configuration utility step 6 (communications Infrastructure ),I am n...

Hello,Does PIX perform NAT on source addresses before or after egress ACL ?Thanks in advance,Emek

I'm setting up a PIX to IOS IPSec VPN. The PIX is on the corporat side and there are several remote networks connected via private lines behind the PIX. The VPN works fine when using 24 bit access lists. If I try to aggregate all of the corp side net...

Hi, Anybody knows how to upgrade signatures on the Host IDS (Entercept) with the Console ? I've been looking around without finding any answers to this seemingly simple question ?? Thanks ! Steve Saindon Network Consultant, CCIE #4046 Interreseau-Con...

Does anyone know if 3600 series router supports DSL Technologies. I will be setting up a VPN Site to Site between the 6 branches I have with 3600 series router and the Central site has PIX 515. I would rather use DSL instead of Fractional T1 since ...

Is there a way to have one of my internal (private IP) accessable from the external PIX interface by the internal IP number. I will not be trying to route this address.Thanks

According to the url below, the Cisco IDS Blade is not supported in native ios. I need confirmation on this. Anyone?http://www.cisco.com/warp/public/cc/pd/si/casi/ca6000/prodlit/6kids_ds.htm

The PIX515 comes with 2 interfaces and can support up to 6 if you have the correct software installed. I am wondering if I can upgrade my 3 port PIX to a 4 port with the addition of a single 10/100 NIc from Cisco or do I have to trash the extra sing...

The PIX515 comes with 2 interfaces and can support up to 6 if you have the correct software installed. I am wondering if I can upgrade my 3 port PIX to a 4 port with the addition of a single 10/100 NIc from Cisco or do I have to trash the extra sing...