Other Security Subjects

I'm running Firewall Version 6.3(4) on PIX-515. For some reason I cannot grep hostnames starting with "H_". Is there something that I'm missing?# sh run | grep 10.0.0.1name 10.0.0.1 H_MYBOX# sh run | grep H_MYBOX# sh run | grep MYBOXname 10.0.0.1 H_...

Hi,I have a pix 515E UR with version 7.0.1 installed. I have had a situation with it that it will not boot and brings up this error:Total NICs found: 2mcwa i82559 Ethernet at irq 11 MAC: 0013.7fdd.xxxxmcwa i82559 Ethernet at irq 10 MAC: 0013.7fdd.x...

C6509->PIX525->3661, pix525 two interfaces,PAT inside to outside,and then C3661 PAT again outside,but some times inside can PING out,but sometimes no.There are not any block ACLs.why?

well I actually have 2 questions,1, I know that I can type debug whatever and send the output to a file using my terminal software. but is there a command so that my pix will send my debug infomation to a syslog?2- is there a way with a debug to have...

Hi.I've made a software upgrade of a CVPN3000 from release 4.1 to 4.7 to get the WebVPN feature. The update succeeded but I couldn´t access the concentrator since then. No more HTTPS access I get the error "You might not have permission to view this ...

Hi all.Can you give me some links to explaine me how harden my switch and lan security to prevent MAC spoofing, arp poisoning, mcast flooding, etc.Thx.

Hi,Does anyone know how to modify the behaviour of Firewall MC in order to stop it renaming objects?This happens when a configured device is imported, then generated, ready for it to be redeployed after changes have been made.I've played around with ...

I have a 1720 router which is configured for VPN and NAT. I'm attempting to connect to an individual on another subnet (not part of my VPN) through Microsoft Net Meeting. I don't have any experience with Net Meeting, but I do know that the other part...

We hv a internet connectivity...I want to secure my lan from internet by filtering unwanted traffic from internet, also i want to assign privilege for administration.I hv configured access-list, antispoofing,privilege,etc..Kindly check if the access-...

pix 515e version 7:Need to allow only port 3389 traffic to pass from outside to dmz, ...could someone provide command reference to get this done, ...everything I try doesn't work. thx.

From Cisco's DMVPN FAQ web page:"Current DMVPN networks have limited support for IP Multicast. Because DMVPN creates a nonbroadcast multiaccess (NBMA) network, the hub routers must send a duplicate of the IP Multicast packet to each spoke router indi...

Hello,Please forgive my lack of technical details - I can get them if needed, but right now I need to know if what I want to do is possible...We have a PIX firewall and are implementing DMZ. The problem is that my test web server has been outside th...

I've configured a site to site VPN connection, between 2 Pix-501 6.3(4). Working great. Unfortunately, 2 or 3 times a day, the connection drop. The tunnel seems to be up, but no information pass in the tunnel. So I "reload" the pix, and everything ba...

I have aworking FWLSM with full OSPF (not static routing)on the inside, outside dmz (are all different OSPF areas). Also on the outside next hope is the MSFC which also runs OSPF. So on the box there is no static routes it is all OSPF.Thinking to get...