Other Security Subjects

I am running Cisco Works VMS 2.2 on a Windows 2000 Professional SP3, with 1GB RAM. I often encounter 1 of 3 different responses whenever I start CWVMS. One, it starts with no problem at all. (by starting I mean, I am able to get to the log on page an...

I can't get the 90 day eval to unzip. It keeps asking me to insert the disks into drive c.

We recently upgraded our VPN 3015 to 3030 but when I looked at the session summary, under concurrent connection it still says 100 shouldn't it be 1500?thanks,gilbert

I have a Cisco 3015 and I use a pool to assign IP addresses to clients. How do I send the assigned/private pool address in the syslog message to the syslog server? I am using this information for tracking security incidents. I am able to send the ...

The start and stop times are something like (1076612237496541000) - this is not typical Julian date format. What format is it?Thanks,Peter

Router is a C1720 with FW/IDS feature set 12.2(17)On a LAN workstation I loaded and configured KIWI-syslog server.(192.168.222.61)On the router I setup the Post Office to send syslog messages to the syslog server(my pc).I have reloaded the router twi...

Hi,I've 2 IDS 4250XL. One with 803 enabled signatures and the other with 931. I've disabled the same signatures in both appliance, why the number of signatures doesn't match?The only difference between them is that one is monitoring traffic and the o...

Quick question about CSA, since I'm having no luck finding anything online (I used http://www.cisco.com/en/US/products/sw/secursw/ps5057/index.html as a start point).Can you customize the attack signatures via either VMS or the MC for CSA?Just curiou...

Is there a way that you can export IDS reports into a .csv file so that one can upload it into Excel for sorting?ThanksDwane

Is it recommended to enable all sensing interfaces (eth7&8) in this case?I actually tried to, but it seems that all traffic always go to eth7. Am I missing something?Thanks!

I am running CSA 4 and I would like to know if there is a way to install CSA kit on remote client machines OTHER than to have a user download the kit and install. I would like to know if this is possible and how it is done. Again, my primary concern ...

Hi,I'm trying to do what I thought would be a fairly simple setup on a PIX501. All I want to do is provide access to a single webserver. Our network is setup up as follows...Our ISP has provided us with a Cisco 800 Series router. It's IP address i...

We have recently installed a PIX 515e replacing a 506e. The reason we did this was to set Citrix Web and Gateway servers inside a DMZ. The pix has three interfaces outside, inside and DMZ. I need to be able to allow the DMZ servers to access a Citrix...

Hi,I know this should be easy but....Pix Version 6.3 (3)PDM Version 3.0 (1)I have configured PAT on my external interface. I can get Internet access from internal clients through the PAT.However I'm having difficulties in setting the translation from...