System returned to rom by error -a seg v exception, pc 0x808a6d30
System returned to rom by error -a seg v exception, pc 0x808a6d30
What is the best setup for the following scenario? The only traffic permitted inbound is smtp to mail server. This is done using port redirection to internal mailserver:static (inside,outside) tcp interface smtp X.X.X.X smtp netmask 255.255.255.255 0...
I installed the image - and according tohttp://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_white_paper09186a00801ab747.shtmlIt should provide ssh. Essentially - I want to use ssh on the 2600 without going to 12.3. i added the domain nam...
Is there anyway to implement time based access control/filtering on the PIX ?
I have a router that gives me exit to the Internet and since about 4 days ago when I ran the command " sh proces " it's showing 59 % to 65 % when the norm has been 3% to 10 %.So there is a device or several of them that are causing too much traffic d...
Can I know is there any maximum users limitation on this model?
Hi,Sometimes I get these messages in the log of our PIX525.106016: Deny IP spoof from (127.0.0.100) to 10.10.19.90 on interface outside106016: Deny IP spoof from (127.0.0.100) to 10.10.17.184 on interface outside106016: Deny IP spoof from (127.0.0.10...
Pix-Admin1(config)# tftp-server inside 204.142.253.65 rootPix-Admin1(config)# write net vik:622Building configuration...TFTP write 'root/622' at vik on interface 1TFTP Error: File Open Error 3[FAILED]Pix-Admin1(config)#I am able to back up my configu...
Hi,What is router shunning and how can i configure it on IDS 4235.RegardsM
Hi,What is the current passing score for CSPFA EXAM.Thanks in advance.VIjay
Hello: I installed a c2610 with IOS version:c2600-ik9o3s3-mz.123-1a.bin as my internet access router.Certainlly,I enabled all the signatures this version can support in order to detect all the attak from internal and external .But now there are two...
Hi ,Can we send a welcome message to VPN clients. I am using a PIX firewall.Regards
How do I get PDM for PIX ver 6.3() ?I upgraded my PIX to 6.3.3. I had PDM 2.1(1)When I open PDM I get the error message that I need to upgrade it.What version PDM do I need to upgrade? and where is the file?ThanxVikas
I installed the S52 sig update on my CSPM server and now I cannot see any alerts. I get an application error with the generator.exe app everytime. Also an application error in cfmi.exe. With the cfmi.exe error the CSPM shutsdown.
My user connects to a PIX with a Vpn client with stateful firewall ON(checked)In this case no one else from outside can access anything on his laptopNow he goes for a vacation and accesses Internet through that Laptop, someone installs a worm/some ot...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-04-2024 12:11 AM | ||
08-14-2024 02:32 AM | ||
08-13-2024 10:56 PM | ||
08-07-2024 05:42 AM | ||
07-05-2024 02:02 AM |