Other Service Provider Subjects

Hi,I am deploying a service control solution for an enterprise that want to monitor and control the bandwidth utilization. The solution contains a SCE, CM, SM, MySQL DB and Console SCA BB machine. I need to develop usage reports per subnet. I tried t...

I have two laptops [Windows 7] each connected on end of 20Mbps pipe.  The MTU of the NICs is 1500bytes. Maximum pingable data size end-to-end  is only 1472 bytes with DF-bit set. When I initiate a normal windows  based file transfer end-to-end the th...

I have a C877 DSL router that I am trying to connect as a linknet so that I can run an igp on it to route my public ip's and private networks back through the DSL. Here is a bad ASCII drawing.Cisco877 --------------- Lucent Stinger DSL --------------...

Hi everyone ,I just want to know how many E1s can cisco 3845 routers support?Warm regards,

We are running ISG on a 10K with Broadhop and using TAL for automatic login for our Customers.  I'm wondering if there is a way to limit the number of IP sessions per Customer.  For instance, if a Customer has a switch or wireless router with multipl...

Hello,We have recently added a Speakeasy Business Ethernet and have a RVS4000 Router.My question is: is there a way to specify the duplex rate on the WAN side of the router? I have seen the ability to specify on the LAN side per each individual port ...

Good Day,What could be the reason for a MC28U line card to enter a state of RF muting? After investing some time in troubleshooting both IP and HFC network, we had to reboot the cmts inorder to resolve the problem. It worked for some hours and again ...

Hi,Does Cisco provides any solutions for satellite service providers ? Is there any document available for designing satellite networks ?Thanks.Rgds./Sack

We currently have 30 locations throughout the United States that have a cable or DSL internet service connected to a Cisco 1721 or 1811 router. This router is configured to create a VPN connection back to our corporate office. We have lost our primar...

Hi,Does anyone have an experience with implementing SCE MGSCP topology and enforcing global BW limits for particular protocols (eg. P2P)?As far as I understood, each SCE within MGSCP cluster has the same PQB file applied, but each SCE enforces define...

SCE can classify Layer 3-7 traffic. How does it handle L2 protocol such as LACP? Will it just bypass it?

We are facing an issue while applying service  configuration to SCE 8000 device using SCE API supplied by CISCO.We have sample .pqb file  which we are using to upload to SCE 8000. We are using 3.5.5 version of  firmware on SCE.Attached is exception f...

We have a temporary 3560 in place with a 100MB Internet link and we are starting to oversubscribe the link.  I'd like to start shaping the traffic which I'm assuming will help with some of the latency and upload/download issues we see when we get clo...