Hi All, please i need a help to choose the right devices for the attached Design, we will deliver the below services over this Backbone. - Internet access - EOMPLS - H-VPLS the condidate devices are : Asr 9006 for Core/GW internetCatalyst 6880-x fo...
Hello, I have an ASR1001 that I want to use as PPPoE, I followed a lot of tutorials and howto's but still not working. My actual configuration: ---------------------------------------------------------------------------------- version 15.2servi...
Hi, I have a problem with my configuration when radius server send attributes of policy and ip address pool doesn't work, the session is established but not apply the policy-map. Thanks asr1001x-universal.03.16.02.S.155-3.S2-ext.SPA aaa group...
Hi, someone can explain what's the difference between SW package, asr900rsp3-universalk9.03.18.03.SP.156-2.SP3-ext.bin and asr900rsp3-universalk9_npe.03.18.03.SP.156-2.SP3-ext.bin. I saw both are for ASR900 series, I'm using ASR903. ...
Hi Guys,i try to configure a BRAS solution for PPPoE/A termination.When try to connect a client i receive the following error:----------------------------------------------------------------------------------------------------------------------------...
Hi, I need to monitor PPPoE sessions for the originating VLAN with SNMP. For Radius the NAS-Port-Id returns reasonable values but not for SNMP. I tried to configure the NAS-Port-Id for SNMP (IOS XE 16.06.02). The default config bba-group pppoe ...
I am looking for any MIB's relevant to the DCM 9902 platform. I can only seem to find IOS based MIBs. Could someone point me in the right direction?
Hi,Customer having issues with remote log-in on DPC3848. Not getting remote access to the cable modem; Web access via the WAN, telnet access and SNMP do not work. All queries do not work. One of the queries being sent is a snmpget for the system d...
Hey guys!I am currently troubleshooting an issue concerning WCCP on our new BNG (ASR 1001-X).We migrated from C3900 to ASR1001-X and here we are coming to troubles, because the Cisco AVPair-Attribute for WCCP seems not to work (anymore)Here is the at...
Hi all! I have a problem with MSDP peering between AS in VRF i using MSDP and e(M)MGP to interconnect PIM(SM)domain. for pim router i use cisco 7606 config on our side: ip vrf Server_Cleaning description IPTV_sources rd 100:10721 route-tar...
Howdy, I have a quick questioning that I can not seem to find an answer to.If I have a UNI port that is configured for dot1q tunneling, and the other side of the circuit is not, what happens to the layer 2 protocol packets? If L2P packets get encapsu...
Hi all, I'm looking fot an equivalent of 6500 feature called Router Guard for Nexus 3000. This feature drops Pim Hello's and IGMP Querries on ports that should not recieve such packets. The problem is that some devices on our large network sometimes ...
How can I reset the password???
Hi, we have a CISCO7606-S with WS-SUP720-3B , recently when the traffic increased to 400 Mbps we are experiencing a cyclique reboot every 20 minutes. when we reduce a traffic everything goes normal. please help to diagnotic this issue. attached...
dear all, I have cisco 3850, and I'm trying to enable QoS per VLAN, my configurations as below, I have port as a trunk port, when applying the service police it take it, but when I do sh run int I didn't see any service police .. any advice plz clas...
