Other Service Provider Subjects

I confirmed Saturday that there is a serious cue trigger (open collector) output problem from D9854s when upgraded to APP V4.00 and FPGA FX100 when upgraded to R35B5. Issue initially reported by one of our affiliates through Cisco TAC after they had ...

Hello All,We have noticed that audio is not in sync with the video for one of the encoded streams.The basic configuration for this servie is set to passthrough and all the delay settings (relative delay and external delay) are set to 0.of course, its...

Hi  recently in reporter appears some weird table at the end of the "Multi Package Bandwidth per Service" report  (RPT_PUR).   The symptom is, that some of the services are named correctly, some of them are denoted with numbers, like this:Names are O...

We recently experienced a total loss of WGN America HD program audio on our downlink monitoring system. Master Control (MC) operator confirmed audio was present at the output of the MC plant. Operator replaced the primary audio processing chain (Line...

what importance source ip has in icmp packetand how it effects the resultsAs i am having completly different results to same destination with different source ipping generated by same router towards same destination router over same linkping 10.10.10...

hi, we have this configuration..policy-map type control DHCP class type control IP_UNAUTH_COND event timed-policy-expiry 5 set-timer IP_UNAUTH_TIMER 1 10 service disconnect ! class type control always event session-start 5 authorize aaa list AUTHO...

Hi, We are integrating Cisco ISG (IOS XE - ASR1001) with AAA and Policy Server.   we have below to specific service provider requirement. 1. TAL  - Transparent Automatic Subsriber for Range of IP or Pool of IP  - how we add such identifier in Policy/...

Good day.Can't get the prepaid feature on ISG to work.I've got virtual BRAS on a base of GNS3 emulating Cisco 7200:R2#sh verCisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 12.2(33)SRD3, RELEASE SOFTWARE (fc3)Technical Support: ht...

Hello,Does anyone know the support level of ipv6 in the Service Control Engine products ?Can it classifiy ipv6 packets and also reconize the applications inside the ipv6 packets ?I'm searching for information of similar products like Packetshaper, wh...

Hi , I have high cpu constantly caused by ip input CPU utilization for five seconds: 45%/9%; one minute: 52%; five minutes: 60% PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process 201   1650855401671097443         98 23.75% 22.92% ...

Hello Guys,Does the ASR1001 acting has an LNS support ISG features like CoA? Thanks!David

We are planning to use the SCE to control/shape the bandwidth of total pipe/link, without considering subscribers package. Totaly shape the link or interface.Eg.10G pipe- 3G/s for P2P and UDP.- 7G/s for the rest of traffic.Can it be done ? What happe...

Hello,I need to know same informations about SP BB design, in our case we have two Cisco routers 7600 for Internet exchange with upstream SPs (3 different SPs) and two 6510 (PE & P at the same time) all with sup 720 3xbl.I want to know the bests prac...