Routers - Small Business

In running a recent PCI compliance scanning test behind an RV320, the following vulnerability was discovered with a recommendation to contact Cisco to report the issue for patching in a future firmware version: TCP/IP SYN+FIN Packet Filtering Weaknes...

I am trying to help a rookie out in the field thats doing his first cisco projecthe inadvertantly deleted the cisco admin user accountinstead of just changing the default passwordhe had an account defined for himself, which he claims he tested 3 time...

Wondering if someone might be able to assist in determining the easiest / quickest method to "monitor" (track) who or what device on our small business network is uploading or how can I monitor data traffic/volume. We'd like a quick, efficient method...

Hi Community !One of the networks we manage is being targeted by chinese hackers/spammers (tons of emails, brute force on every service possible, ...).That network is equiped with a RV180W which is sufficient for day to day operations.We decided to i...

Is my RV340 router reporting the wrong number for the signature file? 

Good day,I would like to ask your help since I'm stuck on this one. I can't open my port 80 it says my port is closed.Below are some of the screenshot of my settings.Did I miss something? I even turn off my firewall, I would appreciate if you can hel...

I have a VPN tunnel setup (Local - RV042 - 192.168.2) to (Remote - RV325 - 192.168.3). Computers in remote office are getting the local subnet even though I have DHCP setup on remote router. Initially setup a couple years ago it was working fine, ano...

  Hi all,I’m wondering whether my RV120w has something wrong. Because I can access many websites even after I add the following firewall rules:Always block,  (services) any, (status) enabled, outbound, (Src ip) any, (des ip) any.Always block,  (servi...

Need some help setting up QoS for voice VLAN. I’m familiar with the RV320 but configuration has changed in the RV340. Honestly, a better explanation of the QoS options in the manual would be very helpful.  Setup I have (2) VLANs, VLAN 1 for Data and ...

 I am working with a 4221 routers with a NIM-1T in one router and a NIM-2T in the other.  I am trying to help troubleshoot the communications issue from 1980's technology type equipment.  I am trying to find Cisco documentation that will give me pin-...

We have configured firewall rules to block "All Traffic (UDP and TCP)" from specific IP address ranges.  These rules are not blocking incoming connections to ports 500 and 4500 for these address ranges.  How do we block these ports when they should a...

I have 3 sites that I need to network together.  My primary reason for this is to allow anyone to print to any location from any location.  I am looking for the best practice for this.  My plan right now is to use an RV320 at each site  and have two ...

Please how to setup EasyVPN on RV320 and on Andriod 9 (AndroidOne)? Should be easy (many tutorials)  but it gives this log entries: 2019-03-02, 07:56:02 VPN Log [grpips0][1] 0.0.0.0/0=== ...46.135.4.24===? #1: [Tunnel Authorize Fail] 3DES_CBC is not ...

After updating the firmware, system won't respond AFTER LOGIN to http/s, SSH or Telnet.  "Forbidden"The configuration is large enough to NOT want to re-enter.  It's been saved of course.What to do?  I still have a 1.3.1.12 in production.

I'm struggling through updating RV320s to 1.4.2.20 firmware.  Similar to 1.4.2.19, I've had trouble accessing the routers' GUI after updating the firmware.  Some time ago I reported an apparent bug that has to do with VLAN configurations that contrib...