Routers - Small Business

When a reboot is performed, the router is falling back to a previous time setting.Probably the latest one set manually, when time is to be set manually and notby a NTP serverAug 28 22:35:39 618579721 KERNEL [Kernel] Dead loop on virtual device sit0, ...

Have just installed the latest firmware (WRVS4400Nv2_v2.0.2.1.img) and QOS is still unusable, I enter the required service details and then click save. The original service entered is then replaced by the first one on the list instead of the one you ...

I upgraded my firmware on my WRVS4400N router and can no longer connect with my VPN client for work... I want to revert the firmware back to 2.0.0.7 to test the connection but am not able to find a copy on the Cisco site.  Please advise if I can obta...

I have 3 subnets that I all want to have my RV220W (1.0.2.4) as the gateway. Where can I add an alias into the router so all three subnets and communicate with it?Thanks!

I have 2 WRVS4400N VPN 2.0 routers (one here and the other at the remote network).  They are both running identical configurations (latest fimware and IPS).  Both are behind a Verizon Fios router and assigned a static WAN IP address.  Here is the con...

HiI just got a new rv120w and want to set it up, like my old router.I have a webserver that people around the world, should be able to visit, but I can't figure whats wrong.You can see my settings in port forwarding here.Can anyone help me out here ?...

Cisco 2nd level support has been very uncooperative and just closed my case and done nothing to solve my problem and to help improving the RV220W firmware by making sure that my test results were used.As a consequence and as I find, there is a need f...

We have two RVS4000 at both ends of a VPN tunnel. The tunnel is up and runs fine. I can ping the two servers at the main office end of the tunnel, and cconnect to the resources of both servers. However, one of the servers, the terminal server, is unr...

RV082 router is not allowing video conferencing through to Polycom 7000 HD.  voice comes through but no video.Have tried several things.1.) necessary ports ( Polycom provided) forwarded to designated internal ip / firewall acess allowed ( external ip...

Ok, I must be missing something- I'm trying to configure my RV 120W to allow for remote VPN connections by a few salesmen. I tried to set it up through the wizard, but the "help" menu tells me that the Remote Information (IP or FQDN) is assnged when ...

I have an RV042 with the PPTP server configured, which is working because I can connect with my iPad and droid phones, however, I'm unable to access resources on the RV042 side (192.168.1.X) when my local network is the same ip scheme (192.168.1.x). ...

I have a RV042 with multiple subnet, 192.168.10.0 and 192.168.9.0. 192.168.10.0 is assigned to the LAN, 192.168.9.0 is created under multiple subnet. Both subnet can access Internet by accessing IP address, but 192.168.9.0 cannot access Internet by u...

Hi!I have my SRP527 with dhcp and works fine.Then i change the router to static ip 192.168.254.254.Then i change the PC ethernet to:IP: 192.168.254.100SN MASK: 255.255.255.0GW: 192.168.254.254DNS: 192.168.254.254After that i loose the WWW access.I st...