Routers - Small Business

I’d like to know if Cisco/Linksys would even entertain opening up PPTP to more than 5 connections?  The problem is QuickVPN has been less than reliable for far too long (it might be another 2 years before it works on Win7 once it ships given the time...

Hello allI'm having a problem -- I'm very unfamilar with cisco products .....when users try to VPN into the network they connect with the cisco client no problem - but are unable to establish a remote desktop connection with any of the computers on t...

I am trying to decide between an SR520, 881, and others, for a teleworker using a site-to-site IPSec tunnel.  What is the max throughput using IPSec on the 520?

Hello,last time i have problem with RV042 fw 1.3.12.6, very frequently i cannot connect to router via web accesswe have two routers in diferrent company and both have same problemPlease have some new firmware?Regards,Tomas

Hello, The SR520W has built-in wireless and DHCP services. However, if I don't want to use the DHCP server of the 520 router, and choose to use a DHCP from another server (Windows SBS), the wireless clients that authenticate do not get an address ass...

I have a customer that needs to create a VPN between to RB082's that would limit the remote site's access to certain devices (in this case telnet-based bar code scanners and IP printers) and from those devices to a single server on the host side.The ...

Hi,I'm using rv042 for vpn connectivity between 3 sites. These 3 routers are configured in nat mode. I have one with a static IP and the two others are initiating ipsec vpn with the one with the static ip. I want that the two subnet of the 2 site wit...

We have just had a new internet connection installed: ethernet connection from Orcon NZ.I'm trying to get my new SR520-FE to connect to the new service and am having a few issues.I've set up the SR520 using CCA1.9, enabled the WAN interface, entered ...

I had a VPN tunnel working on another SR520 and UC520.  I copied most of the vpn parts of the configs over the new set of equipment.  It does not work.  I am trying to plug a phone into the SR520.  It just says registering.  The phone is setup on the...

Hi every one,I have problem in connecting my vpn clientsI have Linksys RV 082 vpn router , i have enabled the PPTP, L2TP AND IPSEC1. I am able to connect through pptp connection, in this the ip address allocating through dhcp server    but i can't al...

Hi Everyone,A potential new client has the RV082 Dual Wan Router.There are 2 ISP's coming into the office - one is from Bell Sympatico - Optimax (BellNet) - DSL and the other is from Rogers High-Speed Internet Extreme.From time to time, there is no c...

Hello i have question about VPN passthrough i looking for some router with 3DES passthrough about 20Mbps.In for example RVL200 i cannot find this parametr.Regards Tomas