I'm looking for ideas on where my TCP handshakes might be going in this lab topology: [Web client] --> [3650 switch & VLAN11] --> [4451 NAT router/dot1q 11 bridge domain/BDI 11] --> [Web server] The 4451-x is running IOS XE Version 16.06.05 (IP Base)...
Forum Posts
Resolved! Routing lan in VPN site to site
Hi everyone, I have setup a VPN site to site between 2 firewall (one cisco and one sonicwall). On my site A, I have a sonicwall with 2 local LAN (10.1.1.0/24 and 10.2.2.0/24) On my site B, I have a Cisco firewall with 1 local LAN (172.18.0.0/20) ...
Resolved! VPN Anyconnect licencing fot RV345
Hi,I have a Cisco router RV 345 and I need to buy licence for VPN AnyconnectHere https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5535-anyconnect-licensing-for-the-rv340-series-routers.html I read to ...
could someone help to summarize and compare the utilization of these bgp technologies?
Good morning, I need help with GSM Modem for Cisco RV130W router. In documentation was write about modems which are very old in this time, and which has very low speed's nowadays.So, do you know something about compatible 4G GSM Modems with this rout...
We have two switches on our network which is unreachable when pinging from our servers. Switch is on 192.168.5.x/24 subnet Servers is on 192.168.1.x/24 subnet The setup is ASA --> SW1 --> SW2 --> Servers. (See diagram uploaded) Our goal is to m...
Resolved! static route track
Hi All,can i track ip 15 hop away from source?please check attached file******************from the router after the cloud **************ip sla 10icmp-echo 10.0.0.10 source-interface loopback1request-data-size 1000tag ** ping 10.0.0.10 **threshold 100...
Hi all, Currently studying for my ICND1 (it's actually tomorrow) and have a pretty decent running home lab. I have set up a few vlans spanning three switches with a ROAS. I'm looking to use a second 1841 ISR as an edge router between my home lab a...
I would like to better understand the role of Feasible Successor in EIGRP. I could not find documentation about it. Thank you for your help
Resolved! Two active WAN connections
Hi, I have a Cisco 870Va router. There are two WAN connections from different ISPs. I need to create a LAN for each connection. Both will have their own DHCP server and each will use a different WAN. So LAN1 will use WAN1 and vice versa. Where I am s...
Hi All, I have ASA5540 and working fine, but our server provider migrate our server with ASA5540 to other infra and they provide me new VLAN, so I appreciate if anybody can help me to make changes on my cisco firewall, they change my WAN port to Vlan...
Hi to all and thanks for support, I configured dmvpn with an hub and one spoke but I attached to hub a router with ospf, and I have a firewall connect to the same router. The hub and spoke has been configured with eigrp. The dmvpn work fine but I ne...
Hi All,Please suggest to me. Right now i'm observing bgp hold timer expired on my router. Current config:ip mtu 1476ip tcp adjust-mss 1460 If i changes the Mtu mss size it will works or not (any suggestion) myRouter(config-if)# ip mtu 1476myRouter(c...
Hi everybody, today I did some troubleshooting on customer site. Following setup: - L2 Multicast, one source and multiple end-devices on the same vlan - inbound ACL on the core-VLAN-interface that only permits certain traffic (DNS, DHCP, ...) ...
hello, how I can to reset the config.text to a router or switch with mode button or reset button, there is a specific platform of switch/router that can do it.I need an ability that deletes the current configuration by an external button. TNX :)
| User | Count |
|---|---|
| 12 | |
| 11 | |
| 7 | |
| 5 | |
| 3 |
