Routing

Hi,I am trying to copy a file from an https server. The https server has the following configuration:ip domain name testaaa authentication login HTTPS localaaa authorization exec HTTPS localusername USER privilege 15 password 0 CISCOip http authentic...

Hello everybody, I am trying to get my Cisco 2811 to authenticate four DSL connections and load balance them by attaching the four DSL to a switch (each DSL going to a seperate VLAN) and then trunking all four VLAN's to a ethernet interface on the 28...

Hi,I've bought a CISCO 1921 K9/SEC a few days ago. But I'm unable to setup my first CISCO device on my own:Network-overview:ISP                                                  CISCO 1921                                                    LAN192.168....

Hi all!!We are having some problems in our Routers equiped with this card EHWIC-VA-DSL-M.There are some situations in that these card cant sync from the DSLAM but if we use another Router (non CISCO eq) the line syncs.We change this card in one of th...

HiI'm new to cisco, I just bought a 5505 to learn from and am trying to attach my VDSL modem as a transparent bridge.It goes.... Laptop   >>> (VLAN1) Cisco 5505 (VLAN2)  >>> VDSL modem >>> internetX.X.X.10 >>> (X.X.X.254) ------ (Y.Y.Y.254)    >>> Y....

I have installed VWIC-1MFT-G703 on Cisco 2811 with PVDM, but my question ->For Cisco 2901, do I have to install PVDM to make VWIC3-2MFT-G703 available????

Maybe I'm misunderstanding somthing:I use EIGRP as my LAN routing protocol with my pair of Nexus5500 switches in vPC. This works fine.I want to fire up routing between the Nexus boxes and a Checkpoing firewall cluster. I fire up OSPF for this. Nexus ...

Hi...I would like to know that.......How many numbers of GRE Tunnels are supported on Cisco 3925 router?Thanks....

Dear All,My HO is connected to BOs over MPLS Links.The links are terminated on routers but i dont have access on those routers as it is maintained by the ISP.Behind of the HO router there is s 3560 switch. Can i configure this switch to prioritize so...

Hello,I have an remote office with a flat /24 network.Users / Servers connect to 2 x 3560 Cisco switches which are uplinked to 2 x Cisco 3925 routers for Internet connectivity and VPN.We are planning to install VoIP in the office and would like to kn...

Hi,Still learning this so please bear with me.I have set up a VPN between 2 routers that are connected over 2 ADSL lines and layer 3 traffic transmits and receives ok. My problem is that i also need to transmit and receive layer 2 traffic and this is...