Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Don't miss this Cisco Catalyst 8000 offer

 
Labels

Forum Posts

Finding accurate answers to your questions and issues is always gratifying, but what if these answers are shared globally across different languages? The Cisco Community team has been working on a proof of concept (PoC) to take Accepted Solutions in...

translator.png Asolution.png htlm-source.png insertcode(1).png
Kelli Glass by Community Manager
  • 10225 Views
  • 7 replies
  • 16 Helpful votes

Hello,I am participating in a preparing a simple, small network proposal. The network should support IP video telephony and should be scalable to provide videoconferencing as the client's business grows. If I were to propose a network with one ISR G2...

Dear Experts,How many VLANs i will need to create for the 30 applications just  like will have Web-Server in DMZ, App Server & DB  Servers inthe Trusted Zone. This will further be compounded by two more  environmentsnamed Development and Staging on t...

ForumI am working at a client site today.  The client has a large Frame Relay Hub Spoke network.  The Hub is at the HQ location, and then there are about 15 spoke sites in remote offices.We are having an issue with the frame between the HQ and one of...

Hi there everybody,i've a strange issue with a cisco 7204 vxr with WAN OC3 (SMI) interface.If I submit the "ahow atm traffic", i receive all F4 counters set to 0 but F5 InAIS: growin up quickly as it grows the F5 OutRDI: 702197. I have submitted the ...

HelloI am setting up an 877 for a standard DSL connection that will have an external IP assigned by the provider with DHCP.  I have set up the inspect rules and the nat overload however there is a server on site that hosts some things over HTTPS.The ...

hey all you Cisco experts!! i have a question. I want to route all traffic to 1 website we use a lot for streaming to a particular interface on my router. this interface is directly connected to my ASA which we use for VPN  termination and i want to ...

micklacey by Level 1
  • 932 Views
  • 15 replies
  • 0 Helpful votes

Hi All,Recently i upgraded my 1841 router with 1HWIC card  and using 4 mbps connection. After that my route geting hanged and after restart its start working.its happening daily once. What may be the issue ? please help IOS details : Cisco IOS Softwa...

Hi to all. Studying route redistribution   between different routing protocols i missed some concept.Contest is redistribution of OSPF in EIGRP protocol.Following the lab topology:My target is to redistribuite the OSPF routes into EIGRP.Based on the ...

Hi. My application is that:Two different ISP connect to router. 1 ISP ip :85.132.21.71 and second one is ISP 2: 81.34.21.34the router is connect to asa. Asa outside ip is 10.0.0.2 is connect to router gi0/1 interface(this ip address is 10.0.0.1).my i...

Hi,I have built multiple GRE tunnel and one of the tunnel has been enabled ip flow. The confguration is as below.interface xxxip address xxxxip mtu 1400ip tcp adjust-mss 1360ip flow ingresskeepalive 5 3tunnel source xxxtunnel destination xxxxWhen I i...

Hido you know backup interface is supported on ASR?interface GigabitEthernet0/2/1description 3750_Stack_1backup interface GigabitEthernet0/2/2ip address 100.50.50.242 255.255.255.248endinterface GigabitEthernet0/2/2description 3750_Stack_2ip address ...

hi,we are getting VPLS cloud from Telco. We have one center and one disaster site which is connect via Metro ethernet and 75 branches are connected to telco VPLS cloud with ADSL.  at center cisco 3945 routersat branches: 2911 routerseverything is wor...