Hi all,should i use mpls ip propagate-ttl "forwarded" or "local" if i want to hide traceroute result in the PE cloud.meaning, only lan/CE traceroute and the internet GW will be shown, and any PE router will be hide. please advice.
Hi,I have a CESoPSN terminated on a T1 port 0/2/1, See below for configuration.controller T1 0/2/1 linecode b8zs cablelength long 0db cem-group 0 timeslots 1-24interface CEM0/2/1 no ip address cem 0 xconnect 10.221.221.87 100 encapsulation mplsS...
we have configured rate-limit command in 851 router for controlling the inbound and outbound traffic. It is configured as,interface FastEthernet4.102 encapsulation dot1Q 102 ip address **** **** rate-limit input 1024000 128000 128000 conform-action c...
Hi techies,can any one help me out , i have 2 router each at 2 diffrent AS, they are connectd through 2 diffrent service providers.the dia is enclosed, on router A i want to route seg 1 traffic on normal senirio and seg 1 & 2 traffic only when SP2 fa...
Hello Friends,What function does a Circuit perform in a WAN?Why do we and where do we have Circuit in a WAN?Regards,Faizan.
How to determine the bad routes in BGP routing table?
We are flooding udp broadcast using routers ( ip helper-address and directed broadcast), we have created tunnels between both the segment of the firewall.We want to replace both the existing lan segment with layer 3 switches on DMS with 4503 and in t...
Hi,I have two Cisco 2811 routers connecting my Head office and Branch office via Metro E link. I have setup and configured ISDN link as backup for this MetroE link. I am testing on the ISDN connectivity. I am getting disconnected with in a second aft...
Currently our client are using thirty units of 2611XM router with IOS c2600-js-mz.123-26.bin.For security requirement, they have to upgrade all the routers to provide SSH access. At the moment each unit have 128MB DRAM and 32MB flash.Having tested a ...
We have 2 different lans..one userhas a hub connected to one switchport..he need 3 network connections for vlan 5. This would give him unlimited network access which is what we want.However..2 users have patched into that hub ..and they have un fette...
Hi,first up I would like to thank the top "Net Pro's" for all their help in the past getting my 857W to work :-) as I had no previous Cisco experiance at all!!About 2 years later I'm now on the CCNA and really enjoying it.This question is kind of rel...
Hi again all,We have a metro ethernet connection between two company sites. It's 1Gbps. We also have a point-to-point DS3 between these two same sites.The 1Gbps link is the primary connection for network traffic. If it fails the point-to-point DS3 ta...
Hi !I'm currently prepare my CCNP, ONT 642-845 certification Exam.I have question about the Frame Relay Explicit Congestion Notification (BECN and FECN).I had provide a small visio plan to make my question more easier to explain.... (see attached fil...
I need an ADSL2+ wic card for a Cisco 1760 Router can any one give me a recommendationcheers
what is a controller & service module ?and what is the functional difference between them ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 12-05-2025 03:27 AM | ||
| 11-13-2025 04:57 PM | ||
| 11-09-2025 09:51 PM | ||
| 11-06-2025 06:09 PM |
| User | Count |
|---|---|
| 3 | |
| 3 | |
| 2 | |
| 2 | |
| 1 |
