Routing

HiOn our network we use 6500/4500 and 2851 routers. On some of our connections we have large output drops "Total output drops: x" counter.Does anyone know how often this counter is incremented is it for every drop or say 1 in 100 i.e. is it limited i...

I have mrtg which graphs cisco 10k router traffic input and output on interfaces. It graphs well except on 1 interface (POS). On this interface the input rate on sh int and on the graph don't much. There is around 120M on sh int and around 6 on graph...

Have a scenario where WAAS is being implemented. The challenge we face is this:1. WAAS is being implemented at headoffice and all sites. Each site, including headoffice, have dual routers with dual links into an MPLS environment, and two WAE applian...

Dear experts,i have cisco 1841 router in that Iam trying block some of the sites using NBRbut i am unable to trace out the problem.plz go through the config and plz tell me where i was wrong,sh runBuilding configuration...Current configuration : 1284...

When redistributing protocols into BGP and using the metric command at the end, what value is that metric value. On cisco documenation, it saids its the IGP metric value, but how is that affect BGP? In other words in the decision process for BGP, h...

HI, I took console for 1760Router after booting the router.it's asking system configuration dialog then i gaiven nobut it's not accepting that even yes alsowhat could be the probelm and what are the points i want to check

Hi All, May i kindly solicit any help as to why some books configures EIGRP in a way illustrated herein.A router needs to advertise the following routes: 1.1.1.0/321.1.1.1/321.1.1.2/321.1.1.3/32And this was eventually advertised as Network 1.1....

Dear friends,Need a simple clarification.How to find ospf version running in cisco? ( not google;)or exactly,which command will show you the ospf version , which is running in your router?tnx in advancerajeev.s

except CLIany tool (SNMP or MIB)can monitorCSS Session(Src to Dst)tks a lot

Will GLBP do load balancing between 2 ISPs which are connected to 2 interfaces on the same router?In other words, I have only one router with multiple physical interfaces. Interface0 will be connected to ISP1Interface1 will be connected to ISP2and In...

Our entire office is made up of l2l vpn connections, and now some dmvpn connections. Our branch's are typically a 2811 router with an internet connection back to corp.I understand the limitations to point of QoS and using the Internet. I understand...

Hi,I have a strange issue, whenever the router reboots it loses its configuraiton.I have already done a "Write Memory" but no luck...router is 2800 series with IOS 12.4

I need to block all outgoing smtp traffic except for the mail server.. I implemented the followingaccess-list 102 permit tcp host 10.x.x.x any eq smtpaccess-list 102 deny tcp any any eq smtpaccess-list 102 permit ip any anyI applied it the interfac...

Client currently has a SOHO. This router appears to only handle 256 open connections. Has to be reset at least once per day. User count is 125. Line speed is 15Meg. We require a router that will handle at least 1024 open connections to the internet. ...