Routing

Hi all.I have paid the smartservice basic for both my cisco 1841 router and cisco asa5510 firewall. However my vendor have not given me the service contract yet. Can anyone advise me on how i can get the service contract? Do i need to register online...

Hi,We are wanting to Geographically profile our inbound traffic via source AS's(As reported via Netflow)...i.e. Percentages of traffic that originated from International compared to local.Is there an online database available that provides where cert...

Hi all.I am deciding the purchase of equipment, and I have a question to finish.My setup in the following:7604-RSP720C-P Cisco 7604 Chassis,4-slot,RSP720-3C,PS)WS-X6748-GE-TX= Cat6500 48-port 10/100/1000 GE Mod: fabric enabled, RJ-45S763ISK9-12218S...

I am trying to set up 2 outside interfaces on my router so that I can route a specific traffic thru one ISP, and all the other traffic thru another ISP. The first WAN interface is the normal FE0/1, but the second WAN interface is a 4 port EtherSitch ...

while the local and personal speed dials work most of the time, sometimes they disappear and the only way (I know) to get them back is to reset the IP phone. Any idea if this is a known bug?

I am currently having trouble getting DNS to work thru my router. I can ping out thru the gateway\router, but cannot resolve hosts. I have enabled DNS on the router, added my ISP's DNS and my two internal DNS systems, but it still does not work. I ha...

I have now been trying to get this fixed for over 8 hours. I have a new cisco 857w I am trying to set it up to connect to a MS ISA 2004 box. The MS box is on the internet and I can get Phase 1 to work ,but the phase two part of the authentication fai...

I need to setup a QoS policy-map on a 3640 running 12.4(17)and cannot figure out 1 small piece. Here is my written policy:1: VOIP RTP traffic should go into a LLQ with 200K of guaranteed bandwidth (I have 2 lines)2: VOIP SIP traffic should be guarant...

Hi,We are going to replace our existing core switch with a newer model, Could some one please share with me what are the best practices to perform this migration peacefully.Thanks

Hi,Currently Iam having 2 nos of Internet Links with 512 Kbps & 256 Kbps.Please Suggest me any new project that I can Implement in my organisation which will recognise me.ThanksNasheer.

I am having trouble with the Message Waiting Indicator Lights on several VOIP phones - the light is not working on the phones when a message comes in. MWI - Any ideas? I have tried various solutions

Hi as the title suggests i wish to use Nbar at layer 7 to qualify traffic for PBR. But i cannot see a direct way to use the Nbar protocols in a route map.One way i have found to do this is to class map the traffic and assign a dscp tag, then use the ...

Hi,I'm planning to enable DHCP snooping. Recently, i did some reading on the subject. One thing that i'm not sure. My network consist of having several remote site all linked through a MPLS network.I have a primary and secondary dhcp server which is...

I am building a lab to simulate enterprise WAN would connect over MPLS cloud.The problem is CEs receives the routes of each other, but can't ping any.I have attached the config. file for the basic routers in the lab setup; CE-1, PE-1, PE-2.Appreciate...

Hi,We currently have a setup with 500 VPN connections ( with ezvpn and connected to a Cisco 3030 ) and we bought a 3845 because the 3030 his getting old.In the 3030 we used "network-list" to control who can access who.With the 3845 we want to use DMV...